Northern Tool Ratings and Reviews

Customer Reviews for Watersource Drive Cap - 2in.

Watersource Drive Cap - 2in.

Item# 108111
Extra-strong Watersource alloy cap threads onto metal pipe to allow proper driving of well points. Material Alloy, Pipe Diameter in. 2, Length in. 2 1/2. Inside recess prevents damage to pipe threads Small vent hole in top of casting relieves pressure during driving operations and can be used as a guide for driving tool
Average Customer Rating:
1 out of 5
1
 out of 
5
(3 Reviews) 3
Open Ratings Snapshot
Rating Summary (3 reviews)
5 stars
0
4 stars
0
3 stars
0
2 stars
0
1 star
3
0 of 3(0%)would recommend this product to a friend.
Customer Reviews for Watersource Drive Cap - 2in.
Review 1 for Watersource Drive Cap - 2in.
Overall Rating:
1 / 5
1 / 5

total waste of money

,
April 4, 2011
By booo
"bought the 2" drive point, 2" drive cap and 2" couplers. The drive point works ok, the drive couplers are great, but the drive cap busted in the first 2 hits (only lasted 10 seconds) there is no possible way this drive cap will help with anything except lighten your wallet. I ended up just cutting and threading a couple extra 1' lengths of 2" pipe to use as a drive "cap" and smashing them until they broke. In my opinion this worked much better, would have cost much less, and helped keep the threads from the rest of the pipe extensions from damage. If I had my arc welder at the time I would have welded a nice thick chunk of metal on top of the scrap 1' lengths for better results and less bits of metal falling down the pipe. Take all precautions on not messing up the threads of the good pipe (this is why I used the short 1' sections on top)."
Describe Yourself: Professional
+4points
4out of 4found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 2 for Watersource Drive Cap - 2in.
Overall Rating:
1 / 5
1 / 5

,
February 5, 2007
By jwjrsc
from SC
"I used the product in sandy soil and found it cracked after about fifteen minutes."
Describe Yourself: Home Handyman
+3points
3out of 3found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 3 for Watersource Drive Cap - 2in.
Overall Rating:
1 / 5
1 / 5

maybe for soft material

,
November 16, 2006
By bdavies
from Dugway Pass Utah
"I was using this on a two inch drive point, it cracked and bent the drive point. I was using it in an arid dry area but we had sounding of water at between 20 and 30 feet. I can swing a sledge hammer with a lot of force but I feel that it should not have cracked in the manner it did. If You are using it is soft material it might work with the drive point quite well"
Describe Yourself: Home Handyman
0points
0out of 0found this review helpful.
Thank you! You have successfully submitted a comment for this review.