Northern Tool Ratings and Reviews
Shop Now At Northern Tool

Customer Reviews for "Northern Industrial Tools Air-Operated Oil Pump with Extension Kit - 1:1 Oil Pump for Oil up to 120 SAE, 4.8 GPM"

"Northern Industrial Tools Air-Operated Oil Pump with Extension Kit - 1:1 Oil Pump for Oil up to 120 SAE, 4.8 GPM"

Item# 109081
"Northern Industrial Tools air-operated oil pump allows for easy integration into transfer system, with differential air motor ensuring smooth pumping. Smart design means fewer parts for less pump wear and easier maintenance. Handles fluids typical in most applications. Extension oil transfer kit enables pump to be easily adjusted according to needs. Includes 2in. bung adapter. Gear Ratio 11, Operating PSI 70-115, Average Air Consumption CFM 8.5, Dimensions L x W x H in. 19 11/16 x 5 5/16 x 5 5/16 pump, 3 x 1 5/8 x 23 5/8 extension set, Flow GPM 4.8. Double action oil pump is easy to operate and maintain Air-operated oil pump allows for easy integration into transfer system, with differential air motor to ensure smooth pumping Smart design means fewer parts for less pump wear and easier maintenance Suitable for use with oils up to 120 SAE Precision machined to ensure stability and long life Extension oil transfer kit enables pump to be easily adjusted according to needs Includes 2in. bung adapter"
Average Customer Rating:
5 out of 5
5
 out of 
5
(7 Reviews) 7
Open Ratings Snapshot
Rating Summary (7 reviews)
5 stars
7
4 stars
0
3 stars
0
2 stars
0
1 star
0
7 of 7(100%)would recommend this product to a friend.
Customer Questions & Answers:
7 Questions | 7 Answers
Customer Reviews for "Northern Industrial Tools Air-Operated Oil Pump with Extension Kit - 1:1 Oil Pump for Oil up to 120 SAE, 4.8 GPM"
Review 1 for "Northern Industrial Tools Air-Operated Oil Pump with Extension Kit - 1:1 Oil Pump for Oil up to 120 SAE, 4.8 GPM"
Overall Rating:
5 / 5
5 / 5

Best Pump!!!

,
September 26, 2014
By KANDRTRUCK
from MI
" Best pump i found around for the price!!! Tried different pumps and this one works the best. "
Describe Yourself: Professional
+1point
1out of 1found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 2 for "Northern Industrial Tools Air-Operated Oil Pump with Extension Kit - 1:1 Oil Pump for Oil up to 120 SAE, 4.8 GPM"
Overall Rating:
5 / 5
5 / 5

1:1 pump

,
February 4, 2014
By ljr57
from Midlothian VA
" I use this to pump waste oil from 55 gallon drums in to a 500 gallon tank for my heater works great even then oil is at 30 degrees take about 12 minutes to pump out a 55 gallon drum every happy with this pump "
Describe Yourself: Professional
+3points
3out of 3found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 3 for "Northern Industrial Tools Air-Operated Oil Pump with Extension Kit - 1:1 Oil Pump for Oil up to 120 SAE, 4.8 GPM"
Overall Rating:
5 / 5
5 / 5

Pumping light wt. grease

,
February 26, 2013
By ACRKE
from Texline, TX
" I tried pumping light wt. GREASE into gearboxes on center pivot irr. systems. It did not work it was too thick. You need a grease pump for anything thicker than what it is recommended for. "
Describe Yourself: Professional
0points
0out of 0found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 4 for "Northern Industrial Tools Air-Operated Oil Pump with Extension Kit - 1:1 Oil Pump for Oil up to 120 SAE, 4.8 GPM"
Overall Rating:
5 / 5
5 / 5

great product

,
February 22, 2010
By peanutplantgonenuts
from Brownfield, TX
" I tried several other pumps to push oil though my hose reels at 100 ft and they just wouldn't cut it or had very little pressure. Hooked up this pump and tested it at 100 psi (air) and got @ 12 qts in one min. of 15w40 at room temp. I am very satified with the pump I ordered the same pump to go into the rest of my 55 gal drums. thank you, GONE NUTS "
Describe Yourself: Professional
-1point
4out of 9found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 5 for "Northern Industrial Tools Air-Operated Oil Pump with Extension Kit - 1:1 Oil Pump for Oil up to 120 SAE, 4.8 GPM"
Overall Rating:
5 / 5
5 / 5

Does the transfer trick

,
August 11, 2008
By shoeoilchangeguy
from Green Bay, WI
" I use this air operated pump to transfer motor oil from 55 gallon drums into my trailer. Every other pump I could find was at least twice the cost so I was a little skeptical. I have tranfered only three drums with it so far, but it has worked great and exceeded my admittedly low expectations. It is of course not as smooth or fast as the diaphram pump I use for waste transfer, but it is also 1/7th the cost and seems better matched to my 6hp compressor. It reminds me of the thumper from "Dune." I highly recommend ordering a hose, adapter and nozzle at the same time. I didn't and had to run around the farm store trying to find something. I ended up with a ten foot hose for fuel transfer as well as a simple fuel nozzle. They work great. A swivel would be a nice, but costly addition. You will need an air coupling and a drum wrench as well. Might as well get it all together and save yourself the running around I had to do. "
Describe Yourself: Professional
-1point
1out of 3found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 6 for "Northern Industrial Tools Air-Operated Oil Pump with Extension Kit - 1:1 Oil Pump for Oil up to 120 SAE, 4.8 GPM"
Overall Rating:
5 / 5
5 / 5

So Good So Far

,
April 26, 2008
By PackerlandMOC
from Green Bay, WI
" I hooked up my pump into my 55 gallon 5w-20 and 5w30 tanks and it worked very well. I have a small air leak, but I think I just need more teflon tape around the 1/4 NPT air fitting(that I added). It should be clear from the description, but don't forget you still need hoses and nozzles for how you are going to use it. I had to make a run to the local farm store and almost ended up with a very expensine hydraulic hose. I found a fuel transfer hose with 3/4 NPT (used a 3/4-1/2 NPT female-female adapter) on both ends and the cheapest fuel nozzle to work very well. I just recommend ordering all of that stuff with the pump. So after the first 80 gallons, it is working great. "
Describe Yourself: Professional
+1point
1out of 1found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 7 for "Northern Industrial Tools Air-Operated Oil Pump with Extension Kit - 1:1 Oil Pump for Oil up to 120 SAE, 4.8 GPM"
Overall Rating:
5 / 5
5 / 5

Air Oil Pump

,
October 8, 2007
By TheIpp
from Steubenville, Ohio
" Excellent pump, would recommend a must buy for people that need it in the industry. "
Describe Yourself: Professional
0points
0out of 0found this review helpful.
Thank you! You have successfully submitted a comment for this review.