Top Rated Product
Product Reviews
Northern Industrial Pneumatic Caster — 300-Lb. Capacity, 10in. Swivel
These rugged pneumatic casters haul heavy loads smoothly and quickly! Air-filled 4.10/3.50-4 tire is 10in. high. 5/8in. bore. Capacity (lbs.): 300, Wheel Size (in.): 10, Mount Height (in.): 12, Bolt Hole Spacing: 2 3/4 x 3 1/2, Top Plate: 4 x 4 1/2, Wheel Type: Swivel, Material: Pneumatic, Includes (qty.): 1 Ball bearings with grease zerks Maximum speed: 5 MPH
Average Customer Rating:
out of
5
7 of 7(100%)would recommend this product to a friend.
Customer Reviews for Northern Industrial Pneumatic Caster — 300-Lb. Capacity, 10in. Swivel
Overall Rating:
/
5
worked for me,
July 21, 2009
By dave199
from maryland
"These casters where used to build a mobile grass catcher cart to pull behind my tracter. they work great."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 2 for Northern Industrial Pneumatic Caster — 300-Lb. Capacity, 10in. Swivel
Overall Rating:
/
5
Heavy Duty,
August 11, 2008
By LawnmowerRacer
from Florida
"I use four of these on a 1000lb transport coffin for a school project-they take alot of abuse and hold up to it. The 10" wheels are great for rough terrain and 'offroad'-only this is the valve stems are a pain to get to."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 3 for Northern Industrial Pneumatic Caster — 300-Lb. Capacity, 10in. Swivel
Overall Rating:
/
5
300 lb 10 inch caster,
April 14, 2008
By fencegod
from southeastern Ma.
"Ok product. one tire was flat and would not hold air. Filled both with Utraseal both hold air fine. Installed on big swing gates as support-- worked fine! Did what I needed but I didn't like the tire that wouldn't hold air. I'll check every few weeks as this is a commercial application in a tourist area."
What is your level of technical expertise? Professional
Share this Review:
Review 4 for Northern Industrial Pneumatic Caster — 300-Lb. Capacity, 10in. Swivel
Overall Rating:
/
5
pneumatic tire workbench,
January 14, 2008
By SantaCruz
from NW Montana
"I purchased the 10" pneumatic tires (4) to make a 36"w, 6'l, 32"h work bench. It is done with mortise and tenon with pegs and mounted on the tires. It turned out quite nice (I used Doug Fir) but the beauty of it is that it rolls anywhere in my shop and when outside vehicle work is needed on the gravel driveway, it rools out there with complete ease. Good sturdy product, but I would have mounted the air valves to allow easier accessability. It is a tight fit. I'm very satisfied overall. Tom."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 5 for Northern Industrial Pneumatic Caster — 300-Lb. Capacity, 10in. Swivel
Overall Rating:
/
5
Great Quality at an Affordable Price,
October 29, 2007
By superdave
from Joplin, Missouri
"We purchased 4 of these casters, saw the heavy duty quality, and purchased 4 more. Our experience has been, if you purchase a quality product at a good price, we had better pick up spares before the price goes up, or the item becomes "unavailable". This product was perfect for a project we had in the works, and we are totally satisfied with the excellent quality."
What is your level of technical expertise? Professional
Share this Review:
Review 6 for Northern Industrial Pneumatic Caster — 300-Lb. Capacity, 10in. Swivel
Overall Rating:
/
5
Swivel Casters,
October 10, 2007
By RedLion
"These casters are rated for 300 lbs. We use them on tow behind trash bins. I don't know what they weigh but these do eventually break at the axle piece going through the metal wheel. I am going to try the 12 in. ones to see if they hold up better or maybe beef up the weld on these."
What is your level of technical expertise? Professional
Share this Review:
Review 7 for Northern Industrial Pneumatic Caster — 300-Lb. Capacity, 10in. Swivel
Overall Rating:
/
5
Large casters,
October 8, 2007
By Hobbs
from Eastern Washington, Tri-Cities area
"I have used two to support the a 4' wide tractor moundted mower for a very large yard. They have worked excellent so far and make it possible to cut the lawn nicely. They are working well; the only problem has been the mickie mouse little grease zerc that comes on them. I have had to change to a larger one by drilling and tapping a hole that will hold it. Other than that, they seem fine."
What is your level of technical expertise? Home Handyman
Share this Review:
