Top Rated Product
Product Reviews
Tie Down Axle Spindle — 1 1/4in. Round, 8.56in. Long, Single
You get one spindle, one nut, and one cotter pin. Spindle is turned from high-tensile, cold-rolled steel on automotive-quality CNC lathes. Spindle must be properly welded to axle tube. 1in. spindle end. Includes castle nut, washer and cotter pin. U.S.A. Rated Load (lbs.): 1,250, Spindle Diameter (in.): 1, Stub Axle Type: Round, Stub Axle Diameter (in.): 1 1/4, Seal Size (in.): 1 1/4, Inner Bearing Size (in.): 1, Outer Bearing Size (in.): 1, Overall Length (in.): 8 14/25
Average Customer Rating:
out of
5
6 of 6(100%)would recommend this product to a friend.
Customer Reviews for Tie Down Axle Spindle — 1 1/4in. Round, 8.56in. Long, Single
Overall Rating:
/
5
Axle Spindles,
October 19, 2009
By furn98
from Potsdam, NY
"I bought a pair of these spindles to use on a portable welder trailer that I was building. They both seem to be made with quality steel. The tolerances are very good also. They worked great with the hub sets that I bought. I will but them again when I build my next trailer."
What is your level of technical expertise? Professional
Share this Review:
Review 2 for Tie Down Axle Spindle — 1 1/4in. Round, 8.56in. Long, Single
Overall Rating:
/
5
Nice product,
July 13, 2009
By JoeyVegas
from Las Vegas
"What can I say... They are nicely machined and I couldn't make these for that price."
What is your level of technical expertise? Professional
Share this Review:
Review 3 for Tie Down Axle Spindle — 1 1/4in. Round, 8.56in. Long, Single
Overall Rating:
/
5
Great Product,
January 26, 2008
By astatefan1
from Jonesboro, AR
"I used these to build a boat trailer axle. They were very easy to use. Just make sure they are straight when you weld them. I would recommend having that done by a professional to ensure proper trailer tracking and tire wear."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 4 for Tie Down Axle Spindle — 1 1/4in. Round, 8.56in. Long, Single
Overall Rating:
/
5
Axle Spindle,
July 9, 2007
By trom
from Mid Michigan
"Good Quality, Fair Price."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 5 for Tie Down Axle Spindle — 1 1/4in. Round, 8.56in. Long, Single
Overall Rating:
/
5
,
March 7, 2007
By 40Shooter
from Evans,CO
"I bought a pair of these spindles for the miniture traler I am building for my motorcycle. I needed a spindle that had enough length so I could weld it into the axle tube. The area of the shaft where the seal rides, had to be machined smooth so that the seal didn't wear out and start leaking. I matched these to the marine grade high speed hubs. together I forsee no major problems."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Review 6 for Tie Down Axle Spindle — 1 1/4in. Round, 8.56in. Long, Single
Overall Rating:
/
5
Axle Spindle,
March 7, 2007
By AlanR
from Lindenhurst New York
"Used the axels on a Marina boat trailer. The trailer has eight tires and carries up to twenty tons of boat. We use to machine the axels ourselves. Can't beat the quality of these axels for ten bucks each. I saved a whole lot of time. Great product for the money !"
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
