Northern Tool Ratings and Reviews

Customer Reviews for Hilliard Extreme-Duty Centrifugal Clutch - 5/8in. Bore, 12 Tooth, 35 Chain Size

Hilliard Extreme-Duty Centrifugal Clutch - 5/8in. Bore, 12 Tooth, 35 Chain Size

Item# 13790
Hilliard Extreme-Duty clutches are ideal for the everyday demands of go-karts and youth-model snowmobiles. Thermodynamically designed clutch shoe increases the clutch's capacity to absorb heat without damaging the clutch springs, thereby providing a longer service life, even in the most demanding applications. For use with engines up to 8 HP. USA. Engagement Speed RPM 2,300, Engine Up to 8 HP, Keyway in. 3/16, Overload Protection Yes, Application Sprocket, Bore Diameter in. 5/8, Chain Type #35, Teeth qty. 12. 5/8in. bore 12 tooth 35 chain size Bi-directional operation Load-free starting Overload protection Easy to install Integral key design Replaceable sprocket Easy-to-change springs Tolerates excessive heat generated by inexperienced riders, riding with one foot on brake, riding in soft dirt and tall grass, and frequent starts and stops U.S.A.
Average Customer Rating:
4.714 out of 5
4.7
 out of 
5
(7 Reviews) 7
Open Ratings Snapshot
Rating Summary (7 reviews)
5 stars
5
4 stars
2
3 stars
0
2 stars
0
1 star
0
7 of 7(100%)would recommend this product to a friend.
Customer Questions & Answers:
5 Questions | 9 Answers
Customer Reviews for Hilliard Extreme-Duty Centrifugal Clutch - 5/8in. Bore, 12 Tooth, 35 Chain Size
Review 1 for Hilliard Extreme-Duty Centrifugal Clutch - 5/8in. Bore, 12 Tooth, 35 Chain Size
Overall Rating:
5 / 5
5 / 5

Great clutch

,
August 24, 2010
By bmars
"I purchased this to replace the oem clutch on a doodlebug minibike. It is much sturdier than the original."
Describe Yourself: Home Handyman
+6points
6out of 6found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 2 for Hilliard Extreme-Duty Centrifugal Clutch - 5/8in. Bore, 12 Tooth, 35 Chain Size
Overall Rating:
5 / 5
5 / 5

clutch

,
January 13, 2010
By lito
"this clutch is great you just need to grease the clutch and it would last you a long time"
+1point
1out of 1found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 3 for Hilliard Extreme-Duty Centrifugal Clutch - 5/8in. Bore, 12 Tooth, 35 Chain Size
Overall Rating:
4 / 5
4 / 5

tough clutch

,
November 11, 2009
By dcress
from Charlotte, NC
"I bought this to put on my go-kart a while ago. its held up well, even though i have a 1:3 gear ratio. There has been minimal wear. You just need to be sure to grease the bearing and a few other parts to keep it running smoothly."
Describe Yourself: Home Handyman
+2points
2out of 2found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 4 for Hilliard Extreme-Duty Centrifugal Clutch - 5/8in. Bore, 12 Tooth, 35 Chain Size
Overall Rating:
5 / 5
5 / 5

good product

,
March 18, 2009
By DenverE
from Fresno, Ca
"this clutch is more than tough enough for my minibike and i was able to mount it backwards which saved a lot of fabrication time by eleminating the need for a jack shaft."
Describe Yourself: Professional
+3points
3out of 3found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 5 for Hilliard Extreme-Duty Centrifugal Clutch - 5/8in. Bore, 12 Tooth, 35 Chain Size
Overall Rating:
5 / 5
5 / 5

Go-Kart Clutch

,
November 21, 2008
By chevyman25
from 29 Palms, ca
"Very easy to install. I put it in my son's go-Kart in an afternoon and he was off and running! Two thumbs up."
Describe Yourself: Home Handyman
+2points
2out of 2found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 6 for Hilliard Extreme-Duty Centrifugal Clutch - 5/8in. Bore, 12 Tooth, 35 Chain Size
Overall Rating:
5 / 5
5 / 5

My mini clutch

,
January 14, 2008
By minigirl
from Colona, Il
"I ordered this clutch for the mini bike that my husband was putting together for me. It came right away and my husband immediately put it on the frame. We had a blast riding around that day. The clutch has been working great ever since. I am not very mechanically inclined, but my husband is. All I know is that I was pleased with the timely manner that my clutch was delivered. Thanks!"
Describe Yourself: Total Beginner
+1point
1out of 1found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 7 for Hilliard Extreme-Duty Centrifugal Clutch - 5/8in. Bore, 12 Tooth, 35 Chain Size
Overall Rating:
4 / 5
4 / 5

Decent for the price

,
July 9, 2007
By ChrisN
from Lufkin, Texas
"Bought this for a mini bike and it went on with no problem. Not a bad light use clutch for the price."
Describe Yourself: Home Handyman
+2points
2out of 2found this review helpful.
Thank you! You have successfully submitted a comment for this review.