Product Reviews
Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Hilliard Extreme-Duty clutches are ideal for the everyday demands of go-karts and youth-model snowmobiles. Thermodynamically designed clutch shoe increases the clutchs capacity to absorb heat without damaging the clutch springs, thereby providing a longer service life, even in the most demanding applications. For use with engines up to 8 HP. USA. 3/4in. bore 10 tooth 41 chain size Bi-directional operation Load-free starting Overload protection Easy to install Integral key design Replaceable sprocket Easy-to-change springs Tolerates excessive heat generated by: inexperienced riders, riding with one foot on brake, riding in soft dirt and tall grass, and frequent starts and stops U.S.A.
Average Customer Rating:
out of
5
8 of 12(67%)would recommend this product to a friend.
Customer Reviews for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
this great clutch,
August 15, 2008
By Johny
from New Egypt, NJ
"This clutch worked great on my go kart. My old clutch used to make a noise when i push my go kart around and eventrally it broke. This new clutch is silent and is easy to put on an engine."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 2 for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
Centrifugal Clutch,
April 15, 2008
By Kartmandu
from Florida
"Excellent poduct.
We use in Go-karts in a small theme park in South America. Replaced when we overhaul the kart after the season is over (1 year)"
We use in Go-karts in a small theme park in South America. Replaced when we overhaul the kart after the season is over (1 year)"
What is your level of technical expertise? Professional
Share this Review:
Review 3 for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
Tough kid tougher clutch,
April 14, 2008
By nobody0857
from Florida
"My buddys grandson could tear up just about anything mechanical ever designed,that is until I bought this clutch for his go kart. It hooks up great has held up better than the last three bargan brand garbage can fillers I wasted my money on. I think for a sleeve bearing clutch this is the best.Thanks again."
What is your level of technical expertise? Professional
Share this Review:
Review 4 for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
clutch use,
January 21, 2008
By opie
from bessemer city,NC
"clutch has hard time engaging after ten min.s of use"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 5 for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
,
October 28, 2007
By Anonymous
"Great clutch . I've had mine for 4 years and it still works."
2 of 2 people found this review helpful.
Share this Review:
Review 6 for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
ok,
October 16, 2007
By boughtit
from Illinois
"ordered wrong size, friend bought from me, he using it for 6 months and no problems yet."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 7 for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
Bad Clutch,
July 9, 2007
By Winterhawk
from Ruther Glen, Va
"I tell you this much this clutch didnt even last me an hour what a waste of time and money"
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Review 8 for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
Hilliard clutch,
July 9, 2007
By Anonymous
from Austin TX
"Clutch performs well. I have actually bought 3 of them, one was modified and still help up to the use I put it through. Does have a spring system that could in theory be replaced if you want it to rev up and engage at a higher RPM"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 9 for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
,
June 23, 2007
By bobby1000000
from WI
"i had this for 1 week on a minibike going 20-25 mph and a tooth broke and the rest wore down."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Review 10 for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
when it comes to demanding power,
March 17, 2007
By tyler
from Florida, FL
"This product is one of many Great products that i myself get from NorthrenTool.This Hilliard Extreme-Duty Centrifugal Clutch is great for sand , mud , or street. You decide. I myself have used this marvelous product in all conditions and what ever i put it through it has worked like a charm. i give this a four out of five stars. trust it works"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 11 for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
Clutch,
December 17, 2006
By cman
from North Fort Myers
"I bought this clutch and put it on a 3 hp. go kart engine and the day I used it within the hour actually It broke and clutch parts went everywhere"
What is your level of technical expertise? Home Handyman
2 of 2 people found this review helpful.
Share this Review:
Review 12 for Hilliard Extreme-Duty Centrifugal Clutch — 3/4in. Bore, 10 Tooth, 40-41 Chain Size
Overall Rating:
/
5
Excellent,
November 16, 2006
By Ngawiecki
from New York, NY
"This clutch has great response and great heat control. It allows quick and easy start from a complete stop. It has a different design then most clutches but its design is what allows the great heat dispersion and activation of the actual tire movement."
What is your level of technical expertise? Professional
Share this Review:
