"This Kohler horizontal engine is an excellent choice for log splitters, pressure washers and more. Bore x Stroke in. 3.5 x 2.7, Shaft Output CCW, Max. RPM 3,600, Cylinder Bore Cast iron liner, Torque ft./lbs. 18 1/2, Shaft Diameter in. 1, Shaft End Tapped Diameter in./Threads per inch 3/8/24, Choke Control Engine-mounted, Air Cleaner Type Heavy-duty cyclonic, Ignition System Electronic, Start Type Electric w/recoil backup, Fuel Filter 3 fill neck, in tank and carb inlet, Governor System Mechanical, Carburetor Float w/bowl drain, Bearing Type Ball, Shaft Length in. 3.49, Fuel Tank Capacity qt. 7.7, Cylinders qty. 1, Engine Type OHV, Fuel Type Gasoline, Engine Displacement cc 429, EPA/CARB Approval California Air Resource Board Yes, Mounting Bolt Pattern L x W in. 7.697 x 3.78, Compression Ratio 81, Cooling System Air, Low Oil Shutdown Yes, Application Log splitter, pressure washer, blower/vacuum, cement trowel, cement mixer, construction equipment, Displacement cu. in. 24.7, Lubrication System Splash, Bolt Circle in. 5, 6.5, Fuel Tank Yes, Rated Power HP 14, PTO Height in. 5.256, Throttle Control Engine-mounted, Muffler Included Yes, Oil Capacity qt. 1.16, Dimensions L x W x H in. 15 x 17.8 x 17.4, Auto Compression Release Yes, Shaft Rotation From PTO Shaft Side CCW, Shaft Keyway in. 0.250, Crankshaft Hardened, Mounting Base L x W in. 7.697 x 3.78. Large muffler for quiet operation Large metal fuel tank with metal cap Single cylinder Aluminum block with cast iron cylinder liner Oil Sentry low oil shutdown system Dual air drains Engine-mounted controls with key box 50-state compliant engine"
Customer Questions & Answers: