Top Rated Product
Product Reviews
Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
This professional Arcan quick lift service jack features a low profile to get under low loads. Lift Capacity (tons): 3 1/2, Min. Lift Height (in.): 3 1/2, Max. Lift Height (in.): 21 3/8 Professional low-profile jack Only 3 1/2in.H to get under low loads Two-stage quick lift Maximum lift height: 21 3/8in. Reinforced side rails Meets or exceeds ANSI/ASME and PALD standards
Average Customer Rating:
out of
5
29 of 29(100%)would recommend this product to a friend.
Customer Reviews for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Love this jack,
November 10, 2009
By subvert
from Colorado
"I have had several Craftsman jacks and thought they were OK until I purchased this unit. I use it to work on the wife's Expedition and my Legacy (lowered). While it is heavy it is easy to maneuver around. I put a pad on the bar so I would not accidentally hit my bumper."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 2 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Arcan Quick Lift Jack,
November 7, 2009
By Anonymous
from Seatlle, WA
"I've owned several floor jacks and can say this is the best one yet. It's well made, has smooth operation and is low enough to fit under my cars which include a BMW. I also like the fact that the lifting range is on the high side especially considering how low it is when in the down position. I haven't tried this on anything heavier than an Outback wagon but it lifted that with ease and with few handle strokes. I would feel comfortable using this on an SUV or Truck."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 3 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Best all-round Jack,
November 4, 2009
By BvRed
from Chicago, IL
Reviewer Images
(click to see full-size image)
"It use to take 20min to either jack up the car or the truck in stages. To jack the truck, I had to use the flimsy vehicle jack & a bottle jack. For the car, ramps and a floor jack. Now about 10 pumps and either the car or the truck is on jack stands, I am literally under the car in 3 minutes. This jack is great! It can get under the sports suspension of the car and it pushes the full size SUV up enough to overcome the articulated suspension. The jack has grease fittings so it is built to last...no more disposable jacks for me!"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 4 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Arcan XL35,
November 3, 2009
By mustang9899
from Arizona
"Well made floor jack. Lifts my Expedition with little effort. Handle is easy to manipulate when trying to lower vehicle, doesn't stick so when you release the pressure the car comes down easy. Jack is very heavy but not unmanagable. Very low profile fits under everthing with ease. Great jack for the money."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 5 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Jack Review,
November 2, 2009
By TxPres
from TX
"Was unable to find in stock in store, so ordered for delivery by UPS.
This is one of the best jacks I have ever seen, Great lifting range. Gets under my 911 with no problem, and lifts to over 21".
Very heavy, but has good capacity and very good finish. Not cheap, but worth every $."
This is one of the best jacks I have ever seen, Great lifting range. Gets under my 911 with no problem, and lifts to over 21".
Very heavy, but has good capacity and very good finish. Not cheap, but worth every $."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 6 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Arcan hydraulic lift,
October 19, 2009
By mtnbikertx61
from Texas
"I looked at several lifts fromthe local stores to online purchases, without going into debt for a jack and getting the most for the dollar, this lift worked with no problems, three complete pumps on the handle and I was able to lift a full Chevy Suburban up for tire and brake repair with the lift centered on the front end. smooth elevation and no sway or movement, Release was simple via twist of handle, Also was able to lower vehicle in small increments with handle release easily, some jacks are unable to bleed off pressure to release vehicle. not the case here. Lift is heavy but sturdy, great for the shop, not for the road, the base plate holds whatever you are lifting, Low profile helps with the low vehicles also. Long extension handle allows better leverage also, It meets the standard and exceeds it ."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 7 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
great jack for the $,
October 19, 2009
By strl
from Woodstock, Ga
"So far this jack has worked extremly well, it is low enough to get under 99% of all the cars you'll work on, and it is long enough to reach the cross member from the front of the car. The jack release's smoothly, no sudden drops, and it has a good lift hight. This jack is well built, I looked at other jacks that were more expensive that didn't offer the features and quality of this jack"
What is your level of technical expertise? Professional
Share this Review:
Review 8 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Finally, a heavy duty, awesome low pro floor jack!,
July 23, 2009
By VTRex
from Vermont
"I've tried a bunch of floor jacks, not just my own but ones that family & friends have too. This one is really heavy. Not pain in the butt heavy but I'm a real jack and i will lift your truck, jack! This things got grunt and when you show this baby off to your buddies in your garage they will envy you!"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 9 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Outstanding shop jack!,
July 20, 2009
By woodsters
from NE Florida
"This is a very sturdy jack designed for use in a well-equipped home garage. With a 3 1/2 ton rated capacity, it is suited for lifting even the heaviest passenger vehicle, including SUV's. The low profile (3 1/2 inches) allows it to slide easily under the lowest ground-hugging car. The length of the handle makes it almost effortless to raise the hydraulic cylinder to it's maximum height.
The only two drawbacks I would note would be the weight and the pump location. First of all, you must be prepared for dragging this unit around. The wheels roll well, but considering the unit weighs over 100 pounds, it is not easily transported from one location to another. Secondly, the design of the pump location allows the handle to snap to the vertical position. If this happens, depending on the location of the jack, the handle may pop up and scratch or otherwise damage the vehicle.
Overall, an excellent value and exceptional jack!"
The only two drawbacks I would note would be the weight and the pump location. First of all, you must be prepared for dragging this unit around. The wheels roll well, but considering the unit weighs over 100 pounds, it is not easily transported from one location to another. Secondly, the design of the pump location allows the handle to snap to the vertical position. If this happens, depending on the location of the jack, the handle may pop up and scratch or otherwise damage the vehicle.
Overall, an excellent value and exceptional jack!"
What is your level of technical expertise? Professional
Share this Review:
Review 10 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Buy it,
July 13, 2009
By Peter101
from Port Jefferson,N Y
"I use it for Ford E-350 and Toyota Avalon, strong enough, low enough. Quick lift.
Buy it, you will like it."
Buy it, you will like it."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 11 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Great Product,
July 13, 2009
By redlum15
from New Mexico
"Exactly as described. This thing is works like a charm! Low profile and very heavy duty."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 12 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
GREAT jack,
June 14, 2009
By johnnymg
from Az
"This is not some whimpy jack! This is one heavy-heavy duty floor jack. This jack is very stable and lifted the front of my full sized pickup like it was a toy.
If you need a HEAVY duty floor jack check this pup out. It was also well packed and arrived promptly."
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Review 13 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Nice jack,
May 2, 2009
By TJRPIGW
from White Plains, NY
"Already used it on my five cars. Well made and Rugged.
Most importantly, I feel "SAFE" now lifting up my cars... :-)"
Most importantly, I feel "SAFE" now lifting up my cars... :-)"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 14 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Great jack,
March 23, 2009
By hotrodv840
from Winnetka, IL
"Well made and durable. I use is a lot around the garage, and is easy to operate."
What is your level of technical expertise? Beginner
Share this Review:
Review 15 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Very Good Jack, Detailed Dimensions Below,
March 23, 2009
By PrimeMover
from Wolverine Lake, MI
"Title sums it up. This thing is low enough to get under my 300ZX no problem, but goes high enough to raise my lifted tracker by the bumper. Yes this thing is HEAVY, but it it is built super strong. Raises quick too and has a nice big lifting surface. Only problem is that as you can see from the picture, because it is not low all the way back, if you have a really low vehicle you have to lift from far underneath you may have a problem.
Some specifics on the dimensions, it is about 4"H at 12.5" back from the center of the saddle and after that goes quickly up to about 6.5"H.
One minor complaint is that if you only attach the first of the two handle segments (the second is not really need) the handle does not way enough to stay down on its own and will spring up against your bumper, which is a little annoying when lowering the vehicle, I just slipped a big piece of pipe I had laying around over the bottom of the handle to weight it down.
Finally the the horizontal section of the side rails is nice because you could use it on softer surfaces like a gravel driveway without it digging in too much."
1 of 1 people found this review helpful.
Share this Review:
Review 16 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Great Jack,
March 17, 2009
By DaveMN
from Hermantow, MN
"This is exactly what I have been looking for. It was shipped from the factory and took more than a month, but worth the wait. I haven't found a jack, until now, that I could get under my riding lawnmower and still use to get my SUV high enough off the ground to work on comfortably. Built good and sturdy. Only draw back is its heavy (100+lbs.), not the jack you toss in the car to help a buddy down the street. That not what I bought it for. Its great in my shop."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 17 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Nice jack, but HEAVY!,
March 16, 2009
By Hainkm
from Muskegon, MI
"First, let's look at the positives. The jack is a 2-stage, low profile (fits under my Jaguar!) and easy to move around. It's also made in the USA! Very nice!
On the downside, the unit is heavy. I guess that's what you get when you get a 3.5 ton jack that's steel. Secondly, the bypass squeaks pretty bad under certain conditions. Doesn't affect anything, just a bit annoying at times."
What is your level of technical expertise? Professional
Share this Review:
Review 18 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Great Item,
March 16, 2009
By tonak
"A serious tool for automotive work, low initial highth with high lift can't be beat!"
Share this Review:
Review 19 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Great Jack,
March 16, 2009
By Spazz
from Iowa Farmer
"This is the floor Jack that every home owner, farmer, or small business owner should have. This Jack is heavy-duty enough to do the job that you want it to do. The thing that I realy like is that it is low profile, You can get it under most cars even if they have a flat tire."
What is your level of technical expertise? Home Handyman
2 of 2 people found this review helpful.
Share this Review:
Review 20 for Arcan Quick Lift Service Jack — 3 1/2-Ton, Model# XL35
Overall Rating:
/
5
Well worth the wait.,
March 6, 2009
By JAC01
from Chicagoland
"Even though this jack was back-ordered for 30 days, it was well worth the wait. This jack is seriously heavy duty and made with impressively high quality construction. I have seen jacks for twice the price that were not made as well. This jack is low enough to fit under the lowest of cars and yet lifts my 3/4 ton diesel pickup with ease. This is not a light duty jack. The shipping mangled the box with the styrofoam packing inside all broken up (but I guess I'll cut them some slack, given the jack weighs 110 lbs). The jack itself was undamaged."
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
