Top Rated Product
Product Reviews
JET Adjustable Trolley — 1-Ton Capacity, Model# 252010
JET industrial-duty trolley is designed for low maintenance and trouble-free operation. Multiple spacer washers make beam flange width adjustment quick and easy. Compliance: OSHA, ANSI/ASME B30.11 and B3017 standards. Capacity (lbs.): 1 ton, Works With: H and I beams, Beam Height (in.): 4 - 19, Flange Width (in.): 3 - 8, Material: Steel, Osha Approved: Yes Rugged steel trolley features lubricated, double sealed ball bearings Built-in bumper guards Can be used with H and I-beams Use on straight or curved track Can be installed or removed at any point along track Easy adjustment — remove one cotter pin and shift spacers to fit I-beam size
Average Customer Rating:
out of
5
10 of 10(100%)would recommend this product to a friend.
Customer Reviews for JET Adjustable Trolley — 1-Ton Capacity, Model# 252010
Overall Rating:
/
5
More than good enough,
March 7, 2007
By Dirigo
from Bucksport, Maine
"I built an overhead hoist this last fall to lift, pull and handle the heavy componants that come with a commercial truck repair shop. Since I needed more than an engine hoist I put this overhead on swivel casters and used 4 inch round tubing for the 12 foot long legs and an 11 foot piece of 5 x 6 I beam for the stringer. This Jet Trolley was shipped to me and was easily installed on the stringer, with a 1 ton chainfall attached to it. The trolley runs the track very smoothly under load, enabling placement of engines, trannys or rear diffs with ease. Head gaskets are a piece of cake. Precise placement is everything when dropping a large one-piece head on a block. This trolley is smooth, stable and easily handles the jobs required of it. Thanks for a great product"
What is your level of technical expertise? Professional
Share this Review:
Review 2 for JET Adjustable Trolley — 1-Ton Capacity, Model# 252010
Overall Rating:
/
5
Nice inexpensive Trolley,
October 19, 2009
By KcNh
from Warner, NH
"I built a 30' x 40' garage a few years ago with (2) 30' x 8" I beams so I wouldn't have any posts in the center. My hobby is working on and restoring antique cars & trucks. I thought "this" trolley would be handy when pulling engines, trans & rear-ends for rebuilding. I was right !!! (for once). I have used it for so many other things also. Loaded my new furn/boiler to the truck to put in the cellar and was able to use my chain hoist & trolley to unload my 80 gal. air compressor and put it in it's place.
Very well designed piece of equipment. Easy to assemble and setup. Good value for price !!!"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 3 for JET Adjustable Trolley — 1-Ton Capacity, Model# 252010
Overall Rating:
/
5
All you need for LESS,
October 19, 2009
By VIVGuy
from Houston, TX
"We bought one of these to see what it would/could do. We could not believe the price so we were sure it was not going to hold up in use...... WRONG!
We now have 7 of these through our operations with ZERO failures!"
We now have 7 of these through our operations with ZERO failures!"
What is your level of technical expertise? Professional
Share this Review:
Review 4 for JET Adjustable Trolley — 1-Ton Capacity, Model# 252010
Overall Rating:
/
5
Works Great,
February 12, 2009
By DSYfromMaine
from Maine
"I purchased this trolley for the I beam in my barn - It is a great value and works perfectly for my application. I lift up the bucket on my front loader to remove it from my tractor. Works Great !"
What is your level of technical expertise? Professional
Share this Review:
Review 5 for JET Adjustable Trolley — 1-Ton Capacity, Model# 252010
Overall Rating:
/
5
Perfect...,
August 11, 2008
By starrcade
from Wexford, PA
"I am a landscaper and working on the equipment was always a royal pain, but now with the trolley and the hoist, lift it, move it where I want. Saves me a ton of time and money...."
What is your level of technical expertise? Professional
Share this Review:
Review 6 for JET Adjustable Trolley — 1-Ton Capacity, Model# 252010
Overall Rating:
/
5
trolley,
August 11, 2008
By charlie02
from south texas
"the trolley is smooth when moving a heavy load. had no problems yet. the trolley is made from heavy enough material that it will last under heavy use, i believe."
What is your level of technical expertise? Professional
Share this Review:
Review 7 for JET Adjustable Trolley — 1-Ton Capacity, Model# 252010
Overall Rating:
/
5
graet prodct,
April 14, 2008
By willbur
from nc
"Good heavy construction. quality product at a great price! Would buy again!"
What is your level of technical expertise? Professional
Share this Review:
Review 8 for JET Adjustable Trolley — 1-Ton Capacity, Model# 252010
Overall Rating:
/
5
Great Trolley,
January 24, 2008
By Maxx714
from Pgh, Pa
"Trolley arrived soon after ordering. The simple instructions led to an easy installation. I had the trolley installed in less that 20 minutes. The trolley is well built from quality materials. Trolley slides on beam very smoothly with little effort. Good Product."
What is your level of technical expertise? Professional
Share this Review:
Review 9 for JET Adjustable Trolley — 1-Ton Capacity, Model# 252010
Overall Rating:
/
5
dolly,
October 8, 2007
By lafave
from North Dakota
"very easy to install. Well made. sinple instructions."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 10 for JET Adjustable Trolley — 1-Ton Capacity, Model# 252010
Overall Rating:
/
5
Jet Adjustable Trolley 1 ton,
March 6, 2007
By Tex3
from Skaneateles, NY
"I received this trolley soon after I ordered it. As advertised, it was easy to disassemble and reaasemble over my I-beam and adjusted to its width. I will be using it with a chain hoist to lift a boat off its trailer so that the hull can be cleaned and repaired. I am very happy with this trolley."
What is your level of technical expertise? Beginner
Share this Review:
