Space-saving PowerPlant onboard unit combines a high-end air compressor with a 12,000-lb. capacity winch. Flip the switch to compressor mode and the PowerPlant puts out enough air to inflate four 35in. tires from 8 PSI to 35 PSI in 8 minutes. Switch to winch mode and the 4.6 HP Gen II Series motor with 3-stage planetary geartrain delivers enough pulling power for for the contractor, farmer, sportsman or large truck owner. U.S.A. HP: 4.6, Line Pull (lbs.): 12,000, Line Speed (FPM): 26.9 at no load and 5.2 at 9500-lbs., Gear Train: 3-stage planetary gears, Clutch: Power in, power out, and freespooling, Braking: Direct-drive cone, Switching Method: Handheld remote control with thermometric indicator, Remote Length (ft.): 12, Rope Type: Wire rope with clevis hook, Rope Size L x dia. (ft. x in.): 80 x 3/8, Fairlead Type: Roller Perfect choice for the contractor, farmer, sportsman or large truck owner Combines 100 PSI air compressor with 12,000-lb. capacity (single line) winch Compressor Integrated air intercooler with 1/2-gallon reserve tank High airflow: 12 CFM @ 0 PSI; 5 CFM @ 90 PSI 100 PSI max. pressure Air pressure switch Thermal protection shutoff switch 25-ft. nylon air hose with quick disconnect Tire chuck Pressure gauge Brass air fittings and couplings Winch 4.6 HP Gen II Series Wound motor Geared to deliver extra-long winching duty cycle Weather-resistant industrial contactor