Product Reviews
Northern Industrial Cross Slide Drill Press Vise — 4in.
Heavy-duty cast iron cross slide vise has replaceable serrated 4in. jaws that open to 3 1/4in. Two swivel crank handles adjust both forward and sideways for versatile clamping and precise drilling capabilities. Set screws hold positioning tightly for drilling. Longitudinal movement of 6in. with cross travel of 4in. Vise is secured to drill press by 3 slots on 2 sides and 1 slot on one end. Jaw Capacity (in.): 3 1/4, Jaw Length (in.): 3, Material: Heavy duty cast iron, Handles (qty.): 2, Longitudinal Travel (in.): 6, Mount Type: 3 slots on 2 sides and 1 slot on one end
Average Customer Rating:
out of
5
2 of 4(50%)would recommend this product to a friend.
Customer Reviews for Northern Industrial Cross Slide Drill Press Vise — 4in.
Overall Rating:
/
5
Press Vise,
October 9, 2007
By RJF401
from DE
"QUALITY NOT VERY GOOD"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 2 for Northern Industrial Cross Slide Drill Press Vise — 4in.
Overall Rating:
/
5
cross slide drill press vise,
October 8, 2007
By Tjd0843
from new Jersey
"The quality is marginal, action is not smooth but works.
Too much play in the cross screws.
It will do the job for now but not really worth the cost."
Too much play in the cross screws.
It will do the job for now but not really worth the cost."
What is your level of technical expertise? Professional
Share this Review:
Review 3 for Northern Industrial Cross Slide Drill Press Vise — 4in.
Overall Rating:
/
5
Cross Slide Drill Press Vise,
July 9, 2007
By TomL
from Connecticut
"The vise seems to be made well, but the bolt down tabs are not wide enough to easily fit the two slots of my Delta drill press table. I had to angle the vise such that the vise clamp was at the back of the drill press, almost touching the drill press vertical mast. However, once I did that it appears as though it will work well enough for my needs."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Review 4 for Northern Industrial Cross Slide Drill Press Vise — 4in.
Overall Rating:
/
5
cross slide drill press vice,
March 7, 2007
By Karl
from Seymour CT.
"when bolted down vise is very solid and very accurate.Great for the money."
What is your level of technical expertise? Home Handyman
Share this Review:
