"This Ingersoll Rand air hammer features an alloyed steel barrel and heat-treated piston for longer life. Tool Length in. 6 1/8, Chisels Included No, Air Inlet Size in. NPT 1/4, Blows Per Minute BPM 5,000, CFM at Load 14, Stroke Length in. 1 5/8, Case Included No, Shank Diameter in. 0.401, Bore Diameter in. 3/4, Min. Hose Size in. 3/8, Air Consumption CFM 2. For light exhaust work, general cutting, chipping and scraping Built-in power regulator and trigger control"
Average Customer Rating:
(2 Reviews) 2
Rating Summary(2 reviews)
2 of 2(100%)would recommend this product to a friend.
Customer Reviews for "Ingersoll Rand Air Hammer - 1 5/8in. Stroke, 5000 BPM, 2 CFM, 90 PSI, Model# 115"
Review 1 for "Ingersoll Rand Air Hammer - 1 5/8in. Stroke, 5000 BPM, 2 CFM, 90 PSI, Model# 115"
great little air hammer
November 2, 2009
from Slidell, LA
I purchased this air hammer to assist in the removal (and cleaning up) of brick from the back of my house while keeping the brick intact. It performed as expected. The max CFM is 14. That's the rate I used it at. My pancake compressor coudn't keep up at 2.5 CFM's... which meant it made the task take longer. I'd recommend a higher CFM compressor for jobs such as brick removal.
Describe Yourself: Home Handyman
6out of8found this review helpful.
Share this Review:
Review 2 for "Ingersoll Rand Air Hammer - 1 5/8in. Stroke, 5000 BPM, 2 CFM, 90 PSI, Model# 115"
Rand Air Hammer
November 19, 2008
from Ashburnham, MA
I used this air hammer to notch an eight foot crack in my basement foundation. Despite having to use a low flow air compressor (Porter Cable pancake) it made the job easy. Great tool for home use.