"Suction tube for detergent. Fitting for 1/4in. air line. Single, Pair, or Set Single, Product Type Cleaning tool. 1/4in. O.D. Chemical Hose Barb Fitting Chemical Hose 7/32in. I.D. x 3 1/2ft. Long Nozzle Orifice 3/32in. I.D. Overall Length 16in. Overall Width 3in. Overall Thickness 7/8in."
Average Customer Rating:
(1 Review) 1
Rating Summary(1 review)
1 of 1(100%)would recommend this product to a friend.
Customer Reviews for Engine Cleaning Gun - 16in. Length
Review 1 for Engine Cleaning Gun - 16in. Length
Works well, descent quality, needs adaptor
June 5, 2015
"This venturi gun works well. Allows you to clean anything with much less solvent or water, using air pressure to take over the job of blasting grime. Made in Taiwan. One caveat: You'll need to adapt this to your quick-connect air system. Included is a 5/16" hose barb attached by what appears to be a 5/16" flare fitting. I ended up buying a length of 1/4" air hose and fitting over the barb with a hose clamp, and then (with a 1/4" barb) attaching a quick disconnect air fitting. You could buy a 1/4" airhose whip, cut it, and attach one end to the gun. Solvent flow is adjustable with a needle valve. Solvent pickup has a small weighted metal filter on the end. For certain applications, this beats pressure washing. It allows use of solvents, and uses very little solvent, but a lot of air."
Describe Yourself: Professional
0out of0found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.