Shop Now At Northern Tool
Customer Reviews for DMK Heavy-Duty 12 Volt Halogen Worklight - Clear, Square, 3in. x 3in. , 55 Watts, Model# CD-109-1
DMK Heavy-Duty 12 Volt Halogen Worklight - Clear, Square, 3in. x 3in. , 55 Watts, Model# CD-109-1
Item# 163482
This tough DMK Heavy-Duty 12V Halogen Worklight delivers dependable long life performance. It is designed for agricultural, construction, forestry and mining equipment, forklifts, utility vehicles and general purpose lighting. Delivers even illumination of work area, resists vibration and is sealed for water and dust resistance. U.S.A. Housing Material Fiberglass, Light Color White, Lights Included qty. 1, Light Size in. 3 x 3, Light Type General purpose, Volts 12, Watts 55, Bulbs Per Light qty. 1, Dimensions L x W x H in. 4 3/4 x 4 1/4 x 4 1/2, Light Shape Square, Mount Type Bolt-on bracket, Connector Type 6 - 8 wire lead, Mounting Hardware Included Yes. H3 halogen bulb Built-in vibration dampening for extended bulb life Tough housing resists chemicals Sealed for water and dust resistance Glass lens resists heat cracking and scratches Symmetrical lens provides even flood pattern to illuminate work area with 90 adjustment range Mounts upright or hanging with included bracket and hardware Includes wires for hard wiring
Average Customer Rating:
(5 Reviews) 5
Rating Summary (5 reviews)
5 stars
3
4 stars
2
3 stars
0
2 stars
0
1 star
0
5 of 5(100%)would recommend this product to a friend.
Customer Reviews for DMK Heavy-Duty 12 Volt Halogen Worklight - Clear, Square, 3in. x 3in. , 55 Watts, Model# CD-109-1
Review 1 for DMK Heavy-Duty 12 Volt Halogen Worklight - Clear, Square, 3in. x 3in. , 55 Watts, Model# CD-109-1
Overall Rating:
Great Light
,August 20, 2012
By Drew2010
from Fulton, IL
"Very Quality Product. Would highly recommend. Much better then cheap parts store lights"
Describe Yourself: Professional
+1point
1out of 1found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 2 for DMK Heavy-Duty 12 Volt Halogen Worklight - Clear, Square, 3in. x 3in. , 55 Watts, Model# CD-109-1
Overall Rating:
Great light
,December 1, 2010
By copotay
from Lafayette, La
"I am installing this on my Polaris Ranger 400 as a rear light to light my bed with a dash installed switch. I have yet to install it because I was trying to figure out which wire was the hot/12v side because there is a black and white wire coming out of the light. Well for all of you wondering like I have been because there are no instructions, I took the light apart and the WHITE wire is your hot side to go to the switch then the positive of the battery, black to ground. Hope it helps"
Describe Yourself: Home Handyman
0points
0out of 0found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 3 for DMK Heavy-Duty 12 Volt Halogen Worklight - Clear, Square, 3in. x 3in. , 55 Watts, Model# CD-109-1
Overall Rating:
Good product
,March 21, 2009
By mballar
from Niangua, Missouri
"I ordered two of these to mount on my skid steer loader. They have worked very well. I was worried about the vibration, but they have held up well, also held up well to being exposed to the weather. They are also very bright, providing plenty of light to work with. I thought the mounting brackets were well made, the hardware actually fit, wasn't the usual cheap made bolts and nuts. The wiring was adequate for the lights and they use a two wire system so you don't have to worry about grounding through the light frame. I am very pleased with these lights and will use them again when I need to replace lights on other farm equipment."
Describe Yourself: Professional
+1point
2out of 3found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 4 for DMK Heavy-Duty 12 Volt Halogen Worklight - Clear, Square, 3in. x 3in. , 55 Watts, Model# CD-109-1
Overall Rating:
Off road lighting
,January 14, 2008
By bluejlandscaper
from Buffalo, NY
"I am pleased with my purchase. They fit well on my mini-skid steer loader. The lights replace a set of oem lights from the manufacturer, that broke after 2 years of use. The pair of new lights fit perfectly on the machine at 1/2 the cost of the oem lights."
Describe Yourself: Professional
+1point
1out of 1found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 5 for DMK Heavy-Duty 12 Volt Halogen Worklight - Clear, Square, 3in. x 3in. , 55 Watts, Model# CD-109-1
Overall Rating:
,
October 8, 2007
By cmarq
from CT
"Very goodlight output, easy to mount. Would have liked info on replacement bulb and changing instructions to be inclued"
Describe Yourself: Professional
0points
0out of 0found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.