The Hobart Handler® 210 Wire Feed MIG Welder handles solid mild steel or stainless, flux cored and aluminum wires, with or without shielding gas. 7 output voltage settings and infinite wire feed control enable fine tuning for the smoothest arc with less spatter. Volts: 230, Amps: 210, Duty Cycle: 30% at 150 Amps, 23V, Mig Ready: Yes, Wire Feed Speed Control: Yes, 40 - 700 IPM, Weldable Metals: Steel, stainless steel, flux corded and aluminum wires, Weld Thickness (in.): 24-gauge up to 3/8in. steel, Clamp Cable Length (ft.): 10, Regulator and Gas Hose Included: Yes, Shielding Gas Required: No, Cart: No, Dimensions L x W x H (in.): 10 5/8 x 19 1/2 x 12 3/8 Amperage output: 25-210 Integrated circuitry for easy connection of spoolgun, Item# 1646190, sold separately Model 500526
Average Customer Rating:
4.9 out of 5
Rating Summary
(9 reviews)
5 stars
8
4 stars
1
3 stars
0
2 stars
0
1 star
0
9 of 9 (100%) customers would recommend this product to a friend.
mig-welder,October 19, 2009
By northernmainewelderfrom houlton maine
"very satisfied with this product. it is just the size i needed for my small shop. it welds big steel and light steel. it also welds aluminum. would recomend buying the tote stand. i intend to order a stand today. thanks for the quick shipping ."
What is your level of technical expertise?:
Professional
Welds aluminum well w/ spoolgun even for beginner,May 17, 2009
By 2strokelikerfrom Near Philly
Reviewer Images (click to see full-size image)
(Click anywhere inside this popup to close it)
One of first aluminum welds
"Can't say how pleased I am with this welder. I have to do some aluminum projects and I hesitated to buy a mig to do aluminum with remarks all over the Internet on how they gave up and bought a TIG. NOT WITH THIS!! This welds aluminum very well. I am a beginner and this pic (hope it goes in) is 2 pieces of 3/16 I welder together. Now you do get a bit of black that easily wipes off as the magnesium in the aluminum oxidizes. This is running straight argon that you need for aluminum. You can see with the cut piece how perfectly the weld fuses together on the side. Extremely impressed with the unit. Would buy again in a heartbeat. I bought the cheaper (same) spoolgun with the 10 foot wiring that came in a case. YOU DO NOT need any module. Thanks Northern for a great deal!!!"
What is your level of technical expertise?:
Beginner
"I love this welder. I was torn between the Miller 212 and the Hobart Ironman 210 for a while before I looked at this welder. I decided I'd save a few hundred bucks and go with the HH 210, and put the savings towards the spoolgun. I don't regret my decision one bit. I have done several projects for myself and friends since buying this machine a couple months ago. I've put about 20lbs of fluxcore through it already and havent had one single problem. The guts of this thing are no different from a Miller and as a matter of fact my gun actually says Miller on it. I'd buy this welder again in a heartbeat."
What is your level of technical expertise?:
Home Handyman
"I have only used this welder without the gas and it works great. at the shop i have a miller 210 and coming home to this is a smooth transition. No problems."
What is your level of technical expertise?:
Professional
handler 210,November 18, 2008
By stang971from Farmersville,Tx
Reviewer Images (click to see full-size image)
(Click anywhere inside this popup to close it)
stang971
"Great welder that packs alot of power! sundown said it best that when you add a spool gun for aluminum to this unit, it becomes a world class combo and i have been recommending it to all my friend and every one i come in contact with being that i am in the parts/service business for major ford dealer! I am in no way a professional but with virtually very little welding experience, i have become very secure with my welding technique and appearance and strength of weld in a very short time!"
What is your level of technical expertise?:
Home Handyman
Hobart Handler 210,April 14, 2008
By Michaelm811from Lipan, Tx
"This is my first welder. I did alot of homework before desiding on the Handler 210. It's very easy to set up and the weld quality is excellant. Being an amature, that means alot. I would recomend it to anyone that needs a mig with high amperage rating. Just right for the weekend DIYer."
What is your level of technical expertise?:
Home Handyman
"I agree with Sundown on this unit...a great performer in a small package...Hobart hit one out of the park with this one......200 amps in the same case as the HH140 !!....it is easy to adjust and dial in, Hobart's tech. and warranty support are second to none and they do what is right for there customers....I look fwd to seeing what they have in-store for the future....if you are on the fence about this machine if the output is right for your use then grab one while you still can...Hobart can't make them fast enough."
What is your level of technical expertise?:
Home Handyman
Handler 210,June 11, 2007
By Sundownfrom Albuquerue, NM
"I have been field testing this new Hobart offering for the past 4 or 5 months, during that time it has performed flawlessly. And when you add the dedicated spoolgun for aluminum it becomes even a better bargin. Lots of performance here for the money for sure, and when you add that to Hobarts customer sevice its a hard combo to beat in my opinion."
What is your level of technical expertise?:
Home Handyman
