The TIGMATE™ is a complete AC/DC, TIG and Stick welding package. All you need is a bottle of argon shielding gas or your choice of Stick electrodes and youre ready to start welding. In the TIG mode, the TIGMATE™ offers superior performance: 18 gauge to 3/16in. steel and stainless steel; 14 gauge to 3/16in. aluminum. For thicker metals, take advantage of the Stick mode using 3/32 and 1/8in. electrodes. U.S.A. Volts: 230/380, Amps: 52/39, Duty Cycle: TIG: 20% at 150 Amps, 15 Volts DC, Stick: 20% at 130 Amps, 25 Volts DC, Amperage Adjustments: Infinite control, Range Selection: AC low, AC high, and DC, Weldable Metals: Steel, stainless steel, aluminum, cast iron, cooper, brass, titanium, and magnesium alloys, Weld Thickness (in.): 18-gauge to 3/16 in. steel and stainless steel; 14 gauge to 3/16 in. aluminum, Electrode Size (in.): Up to 1/8, Electrode Cable Length (ft.): 15, Clamp Cable Length (ft.): 12, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Yes, Dimensions L x W x H (in.): 13 x 25 1/2 x 18 Low frequency output wont interfere with electronics 150 amp TIG torch with flow-through quick-connect cord and finger tip control models Fingertip amperage control Automatically sets for TIG or stick welding AC/DC rated output at 20% duty cycle: 150 Amps at 15V AC Amp range is 20 to 165; DC Amp range is 25 to 160 Upgraded circuitry gives you finer TIG output adjustment with the remote foot or fingertip control. If you need more output while using the remote control, simply increase the setting of the front panel amperage control AC output for superior aluminum welding, DC output for mild and stainless steel Four-position polarity and range selector switch offers two AC current ranges, DC electrode (-) for TIG, and DC electrode (+) for Stick Special arc starting circuitry eliminates high-frequency starts Built-in arc assist stabilizer for AC TIG on aluminum Built-in arc assist starter for DC TIG Unique flow-through shielding gas TIG torch connection allows removal of torch without tools Preset automatic postflow timer protects tungsten tip, workpiece and torch Automatic high temperature shutdown Includes gas regulator, flowmeter, shielding gas hose, and instructional video 5/3/1 Industrial Warranty 5 year warranty on transformers, stabilizers, reactors, rectifiers, rotors, stators and brushes 3 year warranty on drive systems, PC boards, solenoid valves, switches and controls 1 year warranty on MIG guns, plasma torches, relays, contactor, triggers, regulator, accessories, spool guns, battery, field options and running gear. (90 days for industrial use.) Normal wear items such as drive rolls, contact tips, nozzle, gas diffuser, plasma torch tips and electrodes and weld cables are not covered under warranty. Engine warranty is provided by the engine manufacturer.