"The Lincoln Electric Ranger 305 G DC Welder/AC Generator with Kohler Engine is a powerful multiprocess stick, TIG, wire and pipe welding, engine-driven welder. It is ready for all day, everyday performance and includes Lincoln's Chopper Technology for superior arc performance. Since it also includes a powerful generator that produces 9500 Watts of continuous power and 10,500 surge watts, it provides the power needed to run power equipment, lights, grinding equipment or other power tools at a jobsite. The Ranger provides excellent DC multiprocess welding for general purpose welding and arc gouging operations, providing an unparalleled 29V for 300 Amp power for stick welding. Lincoln's Chopper technology provides easy starts, a smooth, reliable arc, low spatter and excellent bead appearance. The Ranger is powered by a 23 HP Kohler engine. U.S.A. Circuit Breakers Yes, Engine Kohler, Duty Cycle 305 A @ 29V, 100, HP 23, Weldable Metals Steel, stainless steel, cast iron, Product Type Welder/generator, Receptacles qty. 3, Auto-Idle Yes, Dimensions L x W x H in. 42 5/16 x 21 1/2 x 29 7/8, Weld Thickness in. Up to 5/32 stick electrodes, Fuel Capacity gal. 12, Start Type Pushbutton, Clamp Cable Length ft. 10, Rated Watts kW 9,500, Welding Amperage Range Up to 300, Surge Watts kW 10,500. Skewed rotor design provides AC power suitable for operating Lincoln inverter power sources CC-Stick mode is optimized for general purpose stick welding using E7018 low hydrogen electrode Downhill pipe welding mode is excellent for cellulosic electrodes, providing fast travel speeds Integrated arc control provides a soft or more forceful digging arc Touch-Start DC TIG mode lifts tungsten to start arc, with no high frequency required, avoiding contamination in weld Simple controls keep training time to minimum Dual digital output meters allow presetting weld amps"