"The Lincoln Electric Outback 185 Welder/Generator is built for the outdoors and is a great choice for service trucks, fence contractors, maintenance crews, farmers, ranchers and anyone needing portable DC stick welding and AC generator power. It features Low-Lift grab bars on both ends, making it easy to lift the Outback 185 on and off truck beds. It provides easy starts and has all engine controls on the front of the machine. The powerful 12.75 HP Kohler engine provides plenty of welding power and 5200 continuous Watts of AC generator power for a grinder, work lights, a pump, motor starting or emergency power. U.S.A. Welding Amperage Range Up to 185, HP 12.75, Circuit Breakers Yes, 3, Rated Watts kW 5,200, Duty Cycle 100 at 25V DC, 25V, Clamp Cable Length ft. 10, Fuel Capacity gal. 6.8 gallons, Surge Watts kW 5,700, Receptacles qty. 3, Start Type Electric switch, Weldable Metals Steel, stainless steel, cast iron, Dimensions L x W x H in. 31.5 x 21.1 x 25.5, Weld Thickness in. Up to 5/32 stick electrodes, Engine Kohler, Auto-Idle Yes. Low lift grab bars provide better leverage All engine controls on front control panel Easy access for starting, especially from truck beds Rugged tube frame construction Large fuel fill opening for easier refueling Welds up to 5/32in. electrode Delivers up to 21.6 Amps continuous power from 240V AC receptacle and up to 40 Amps continuous power from 120V AC duplex receptacle Outlets feature circuit breaker protection and have weather protective covers"