Product Reviews
Northern Industrial Tools French Fry Cutter
Two stainless steel grids with 25 and 49 holes for large or small cut fries. Makes 1/2in. and 3/8in. fries. Suction base provides extra support. Cutting Thickness (in.): 2 Blade Grids - 1/2, 3/8 ABS Plastic Body 9 1/2in. x 4 5/16in. x 4 3/4in.
Average Customer Rating:
out of
5
20 of 21(95%)would recommend this product to a friend.
Customer Reviews for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
Great Fry Maker,
November 8, 2009
By BobLeChat
from Madison, CT
"The only reason I did not give this a five star is because you have to cut large potatoes in half.
Here are all the good reasons.
It always sticks to the counter well and never comes loose.
You can make show string or regular size fries
great for making home fries
Real Easy to use as long as you press quckly
Saves you $$$ over store bought fries
Great tasting fries - much better than fast food chains
We use this to cut up zuchinis and other vegetables and saute them.
This one is well worth every penny and then some."
You can make show string or regular size fries
great for making home fries
Real Easy to use as long as you press quckly
Saves you $$$ over store bought fries
Great tasting fries - much better than fast food chains
We use this to cut up zuchinis and other vegetables and saute them.
This one is well worth every penny and then some."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 2 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
French Fry Cutter,
August 19, 2008
By tigerpaws
from Blountsville, AL
"I love this little gadget! The only thing I don't like about it is if you have a large potato, you have to cut it in half. It's easy to clean too."
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Review 3 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
Just as advertised,
August 11, 2008
By DaveD
from new jersey
"nice lttle gadget, that gets the job done quickly.. I have used it a lot, and it has held up well."
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Review 4 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
Frency Fry Cutter,
August 11, 2008
By suainie
from Collinsville, VA
"We had been looking for a french fry cutter of this type and the price at Northern Tool was far better than anyone else. Most retailers do not carry this item at all any more. This is a very handy item in the kitchen and can be used for more than just cutting potatoes into french fries. I have found that prices and service at Northern Tool can't be beat."
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Review 5 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
french fry cutter,
April 16, 2008
By BIGIN
from brunswick ga.
"works great but you cant use large potatoes in because the cutter isnt long enough. works well with the smaller ones."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 6 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
A treasure,
April 14, 2008
By CMPM
from Central, MA
"Although I certainly wanted to buy the upgraded model, I have been pleasantly suprised by this little wonder. If your feeding a tentload, it's not the unit for you and I would suggest the upgrade. But for our small family, it's perfect. The kids participate and they honestly get excited when we make french fries."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 7 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
French Fry cutter,
April 14, 2008
By thelodge
from Charlestown, NH
"Cutter works great, smaller than I had thought it would be, cannot handle really large potatoes, but small to medium work fine."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 8 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
,
January 21, 2008
By ferron
from roanoke va
"works great for making fries and slicing other vegtables"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 9 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
french fry,
January 15, 2008
By nanna
from virginia
"The french fry cutter makes great french fries but it is very difficult to push the handle to cut the potato. It requires a man's strength to push it. If you could make it a little more female friendly, it would be great."
What is your level of technical expertise? Beginner
Share this Review:
Review 10 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
french fry cutter,
January 14, 2008
By whittp2002
from WV
"It Is really well bulit but the only downside to this is you can't use just any potatoes for this it can only be so big around and so long or it will not work unless you cut the potato before you try to use it."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 11 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
French Fry Cutter,
January 14, 2008
By Blackfoot16D
from Long County, Ga
"I purchased this for my wife, and she absolutly loves it, it saves her time in cutting up potatoes to make home made deep fried french fries. The suction cups work quite well in holding it firm on the counter, and it even cuts larger potatoes with relative ease. Because of size constraints, some potatoes if the are excessivly large must be cut smaller. Other wise, a very worthy product for the price. My wife and I recommend it very highly."
What is your level of technical expertise? Beginner
Share this Review:
Review 12 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
french fry cutter,
January 14, 2008
By lovncarenana
from Portsmouth Virginia
"When I purchased my french fry cutter a couple of years ago, I had pretty low expectations. I just needed something to help me get dinner on the table a little bit quicker and with less pain. (corporal tunnel) This cutter comes with two interchangeable blades and an almost unbreakable plastic frame. A lever locks the suction cup to the counter so that it will stay immobile while in use. I lock it on the counter next to the sink and sit a bowl benneath it. Then all I need to do is place my veggie of choice inside and gently push the handle down. Out shoots wonderfully chopped up chunks of my veggies. (great for mashed potatoes) I so enjoyed using it that I began to use it for all kinds of stuff. I experimented on many veggies to see which ones worked and which ones didn't. (tomatoes are not recommended) all potatoes (white, red and sweet), cucumbers, onions, peppers, apples etc. work great. I just leave my cutter on the counter these days after washing because it will get used for something almost everyday.
I enjoy using it so much that I purchased one for each of my four children for Christmas. They feel the same as I do! It is a great tool and I don't have to bribe anyone to help cut up the potatoes for dinner any more.
Thank you for a great product under $20.00."
Thank you for a great product under $20.00."
What is your level of technical expertise? Professional
Share this Review:
Review 13 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
Fabulous French Fry Cutter,
January 14, 2008
By cj1110
from Keysville, VA
"I bought my husband this french fry cutter last Christmas and we have thoroughly enjoyed it. He had all of his buddies over for a cook-out and fixed the fries with it. They all loved them and wanted to know where we got it, so we told them. I order three more this year and gave them to his buddies as Christmas gifts!!"
What is your level of technical expertise? Beginner
Share this Review:
Review 14 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
great,
January 14, 2008
By linw
from anchorage alaska
"item works great. i bought it for my father and my brother for x-mas. they said the design and item had good blades and easy to push. it worked very well. the design is the same as when we had one from years gone bye."
What is your level of technical expertise? Professional
Share this Review:
Review 15 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
great for the price,
October 29, 2007
By modog
from cumberland, md
"this is a great product for the price. I do wish it would cut larger potatoes. The 2 different blades change easily and clean up is a breeze. It also works great on other vegetables like cucumbers and carrots etc.."
What is your level of technical expertise? Beginner
Share this Review:
Review 16 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
Good gift,
October 15, 2007
By erogers
from Rocky Mount, NC
"Got this for a Christmas gift. Have one similar myself. Great product when having company over. Cuts all slices same width allowing all pieces to cook to same browness. Great product!"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 17 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
French fry cutter,
October 8, 2007
By Geo83
from Cattaraugus,NY
"This is a well made product .Easy to use and cuts the potatoes easily .Would recommend it to everyone.Can also be used to cut other vegetables too."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 18 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
French Fry Cutter,
April 5, 2007
By aber
from Allentown Pa
"I had been looking for some time for this item. When I saw it in your catalog I ordered 2 one for my son. So far they have don an excellant job. I have bought several other items and have been very satified. The service I have gotten from your people has been excellant."
What is your level of technical expertise? Professional
Share this Review:
Review 19 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
OK Cutter,
March 7, 2007
By Toolboxt
from Kentucky
"Works great but the opening could be bigger. You can only cut small potatoes or cut them in sections first. I feel this is a good buy for the price. I liked the suction cup bottom. It is fast and handy as long as you have smooth counter tops."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 20 for Northern Industrial Tools French Fry Cutter
Overall Rating:
/
5
poor grids,
February 1, 2007
By brooks
from king george
"i really liked the product, but the steel grids did not last!
the little grid broke in about a week and the large grid broke less than a month!
get good grids and it would be a good product, but now i have a product with no grids so it is no good!"
the little grid broke in about a week and the large grid broke less than a month!
get good grids and it would be a good product, but now i have a product with no grids so it is no good!"
What is your level of technical expertise? Home Handyman
Share this Review:
