Briggs & Stratton Snow Series MAX Horizontal Engine. Intek engines are designed and built to provide the highest level of performance and power available. Compact OHV design increases engine efficiency and valve life. Aluminized Lo-Tone muffler offers superior sound reduction and corrosion resistance. This engine has large displacement for increased torque and easy removal of wet heavy snow. Fuel Tank Capacity qt. 3, Application Snow blower, Start Type Recoil, Shaft Length in. 2 27/64, Shaft Output Horizontal, Cylinder Bore Aluminum alloy, EPA/CARB Approval California Air Resource Board Yes, Fuel Type Gasoline, Engine Type Snow Series MAX, Shaft Diameter in. 3/4, Torque ft./lbs. 11.50, Max. RPM 3,600, Bore x Stroke in. 2.97 x 2.20, Shaft Keyway in. 3/16, Dimensions L x W x H in. 10 1/8 x 15 9/16 x 14 3/8, Auto Compression Release Yes, PTO Height in. 4 11/64, Oil Capacity qt. 0.56-0.63 18-20 oz., Shaft Rotation From PTO Shaft Side Counterclockwise, Lubrication System Splash, Carburetor Float, Mounting Base L x W in. 6 3/8 x 3 1/8, Engine Displacement cc 250, Ignition System Electronic, Muffler Included Yes, Low Oil Alert No, Shaft End Tapped Diameter in./Threads per inch 3/8-24, Governor System Mechanical, Bolt Circle in. 3 5/8, Cooling System Air cooled, Cylinders qty. 1. Freeze-resistant recoil starter and mitt-grip handle Ergonomically designed rewind handle and controls for easy use in cold weather Computer-optimized snow hood maintains constant carburetor and engine temperatures to optimize cold-weather performance and prevent freeze-up
Average Customer Rating:
(1 Review) 1
Rating Summary(1 review)
1 of 1(100%)would recommend this product to a friend.
Customer Reviews for Briggs & Stratton Snow Series MAX Engine - 250cc, 3/4in. x 2 27/64in. Shaft, Model# 15D112-0006-E8
Review 1 for Briggs & Stratton Snow Series MAX Engine - 250cc, 3/4in. x 2 27/64in. Shaft, Model# 15D112-0006-E8
I like them
January 16, 2012
from Lillington, North Carolina
"I have used many Brigg-Stratton engines over the years and have always had very good luck with them . I bought an engine 5HP from Northern in Cary a few years ago and installed it on a Troybuilt tiller, its got many hours on it and is still running strong. Thank you"
Describe Yourself: Professional
0out of3found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.