"The Jobox 60in. Piano Lid Box offers the ultimate in rugged, dependable and secure tool storage on jobsites and industrial sites. Its Site-Vault Security system has 50 more locking points than competitive models and is virtually impossible to bend or pry open. EZ-Loader skid bolsters make it easy to load the box on a forklift to move around the jobsite or load on a truck. U.S.A. Finish Type Textured powder-coat, Lockable Yes, Capacity cu. ft. 47.5, Handle Type Recessed, Fork Lift Channels Yes, Material Type Steel, Dimensions W x D x H in. 60 x 31 x 50, Lock Type Master #5 padlock not included, Handles qty. 2, Material Thickness in. 16-gauge. Virtually impossible to bend or pry open Bolt cutter proof lock housing is fully welded for security Full-length 12-gauge steel lock console with 3 locking points Formed lid sides are welded to lid bolsters to resist pry bar entry Gas spring door lifts with quick release mounts assist with opening and closing the door Lifts are embedded in the side walls and protected from damage and jamming Guards reinforce the side walls EZ-Loader skid bolsters are 7-gauge, 1-pc. steel bolsters with holes to install optional casters Formed-in reinforcements strengthen skid bolsters EZ-Loader skid bolsters allow chest to be fork lifted from all four sides to easily move around jobsite or load on truck 2X wider side walls Formed side wall design allows the door to overlap the side walls when closed to resist pry bars and moisture Lift-N-Stow bottom shelf on most models lifts up for easier loading and unloading of large items in the bottom Storage bins on both side walls Lower front panel reduces lifting Door opens a full 90 Recessed handles with extra-tall and deep recessed areas prevent pinching fingers and damage to the handle Fully staked and welded hinge with 3/8in. hinge, 1/4in. pin and 1in. knuckles"