Top Rated Product
Product Reviews
FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Versatile utility blowers feature rolled steel opening and auto reset thermal protection for optimal use. Industrial-grade grounded cord and easy to carry handle. Fan Diameter (in.): 8 (Fan) 12 (Blower), Air Delivery (CFM): 2,905, HP: 4/7, Watts: 430, Amps: 3.8, Volts: 120, Speeds (qty.): 2 GFCI included UL approved for wet locations
Average Customer Rating:
out of
5
19 of 19(100%)would recommend this product to a friend.
Customer Reviews for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
tough and portable,
October 19, 2009
By nickyv
from Pryor,OK / Industrial Contractor
"This ventilator/fan is tough enough to stand up to use by our ironworker's in cement and power plant maintainence work. They can be located almost anywhere in your work area to provide ventillation and cooling."
What is your level of technical expertise? Professional
Share this Review:
Review 2 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
This provides a healthy environment to work in.,
October 19, 2009
By mexikaner
from San Francisco CA
"This is a great little/companct piece of equipment which allowes me to work in a healthier environment and cause a smaller invasion on my clients properties by eliminating fumes/dust from painting. Thanks"
What is your level of technical expertise? Professional
Share this Review:
Review 3 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
owner,
October 19, 2009
By truckendog
from pa
"flow pro blower is used for a farm related applacation. it is strong and sterdy enough to handle meany types of jobs, i use it to blow air acrosed grain to help clean or remove dirt from the grain. it works well, wish i would have bought two at the time that i bought."
What is your level of technical expertise? Professional
Share this Review:
Review 4 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Flow pro utility blower,
July 21, 2009
By ajfloors
from Selden, New York
"I am a flooring contractor and use this fan for installations and sand and finishes. It really cuts down the dust level inside the house!!! Also use it for small renovations. Just place the fan in a window or exterior door. Awesome power! Highly recommed to any contractor or do it yourselfer.."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Review 5 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Good for the price,
July 20, 2009
By ORCM
from Oregon, OC
"-Well built fan for the money. Well balanced, and exceptible noise for as much air as it moves.
-No problems yet, but the switch seems a little flimsy.."
What is your level of technical expertise? Professional
Share this Review:
Review 6 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Great High Power Fan,
March 23, 2009
By Anonymous
from Santa Barbara, CA
Reviewer Images
(click to see full-size image)
"Nice and sturdy, lots of CFM for its size. Fairly loud on the high setting, but for the power it cranks out you can't argue."
What is your level of technical expertise? Professional
Share this Review:
Review 7 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Bunkhouse faviorte,
March 3, 2009
By weretherethelp
from anywere diaster strikes
"so being a sar team we are mobile and depend on our equitment very much
we love this fan and depend on it
what we so is in the bunk trailers we leave on at each end and leave the doors open and turn em on and it gets air going through the trialer very nicely
its lighter then a ac unit and it is more versitle
ide recomend it to anyone"
What is your level of technical expertise? Professional
Share this Review:
Review 8 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Utility blower,
November 17, 2008
By Buckaroo
from Wisconsin
"I purchased 2 of the 2450 cfm FlowPro utility blowers to help with moisture issues on our concrete floors on our dock during high humidity conditions. They outperformed all of the barn fans that we have used in the past and are much easier to handle and store. The price is much less than I have seen for similar products. They each have over 250 hours of use already and I have not had any issues with them. I would definitely recommend this product."
What is your level of technical expertise? Professional
Share this Review:
Review 9 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Blower really works,
November 17, 2008
By bjc123
from Massachusetts
"We use this blower to dry dogs after bathing them. We've previously used floor dryers for this task, however they don't provide a large uniform blow on the dog, and they tend to walk around if they aren't tied down. This blower stands firm and puts a large front of high velocity air which dries the doggies quickly. Not too noisy either. We're happy with it."
What is your level of technical expertise? Professional
Share this Review:
Review 10 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Works as advertised,
August 12, 2008
By dosamigos
from Los Cabos, Mexico
"We make our own chicken feed and I bought two of these blowers to cool the hot pellets after coming out of the machine. They work fine and get the job done but it is a good thing we are outside and are already wearing hearing protection. This blower is loud, no way would I use it in the house. Otherwise I would recommend it to anyone who needs to move some air."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 11 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Lives up to the ad copy!,
August 11, 2008
By IntegrityJohn
from Manning, SC
"Purchased for a paint-odor job in a church. Man, this thing moves SERIOUS amounts of air, with reasonable noise and almost no vibration. In combination with the flexible 20' duct, this thing is just the ticket for odor removal or drying projects. Built like a tank, too!"
What is your level of technical expertise? Professional
Share this Review:
Review 12 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Utility Blower,
April 14, 2008
By plam
from RI
"We had been looking around for a blower unit that was reasonably priced with high volume. Most of the ones in the industrial supply catalogs where in the $5-600 range and did exactly the same service as this one.
This is a very good little blower and does exactly what we needed. Ventilating vaults and confined spaces (non hazardous locations) for routine work.
It is all steel and seems to be reasonably durable throughout and performs exactly as advertised. I have recommended it to some of our other crews already.
The paint on it is somewhat thin and would not likely stand up to rough use.
Keep it moderately protected and it should last a long time.
Great blower for the money."
This is a very good little blower and does exactly what we needed. Ventilating vaults and confined spaces (non hazardous locations) for routine work.
It is all steel and seems to be reasonably durable throughout and performs exactly as advertised. I have recommended it to some of our other crews already.
The paint on it is somewhat thin and would not likely stand up to rough use.
Keep it moderately protected and it should last a long time.
Great blower for the money."
What is your level of technical expertise? Professional
Share this Review:
Review 13 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
FlowPro Utility Blower,
April 14, 2008
By Smitty4421
from Holbrook, Mass.
"We
now have three of these blowers and use them daily for removal of dust
and fumes from construction work and equipment in confined spaces. They
can move a tremendous amount of air for their size and have not found
anything else to compair with them for the price."
now have three of these blowers and use them daily for removal of dust
and fumes from construction work and equipment in confined spaces. They
can move a tremendous amount of air for their size and have not found
anything else to compair with them for the price."
What is your level of technical expertise? Professional
Share this Review:
Review 14 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
It does a great job,
January 21, 2008
By inNH
from Mancheseter, NH
"Very happy with the blower. Excellent for moving dusty air as well as drying wet floors."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 15 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Flowpro blower,
January 14, 2008
By bodyman2
from Mid Mo
"I have three of these fans- two of them have been in use for about 2 years and I just bought the third. They get used nearly every (business) day and are still running like new. I am very happy with my purchases."
What is your level of technical expertise? Professional
Share this Review:
Review 16 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Excellent exhaust fan,
October 1, 2007
By RonVA
from Virginia
"This fan efficiently removes dust and fumes from both large and small areas. I have used it when cutting plaster, drywall, and concrete, and it has considerably reduced (or eliminated) my subsequent clean-up time. It also provides great fume extraction when using gasoline-powered equipment in enclosed areas.
Even on the low setting, it has a tremendous air-moving capability for its compact size and relative light weight (about 30 pounds). And it is easy to transport -- it would likely fit in the front seat, floorboard, or trunk of most vehicles. Up close, it is loud, and I would recommend ear-protection when working close to the fan. And I would also recommend buying a 14" x 25' flexible mylar extension duct to route the exhaust away from the work area. Overall, this is an excellent exhaust fan."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Review 17 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
blower,
July 9, 2007
By greenjl4
from North Carolina
"My company purchased this air blower to resolve a safety issue wih exhaust fumes in an enclosed area. We tried smaller blowers with no positive results, but this unit was able to dispense some serious air volume and eradicate the enclosed area from the exhaust created by a backhoe loader being tested. We take our safety quite seriously here, and this unit helped us maintain our stringent requirements for fume exhaust."
What is your level of technical expertise? Professional
Share this Review:
Review 18 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
FlowPro Blower,
March 27, 2007
By Jarhead
from S. Florida
"For the money, this is a great piece of equipment. Be warned this thing really moves A LOT of air. Its quiet, and unbelievably powerfull."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Review 19 for FlowPro Utility Blower — 12in., 4/7 HP, 2905 CFM, Model# 39012
Overall Rating:
/
5
Great fan,
March 6, 2007
By sunnyside
from Durango, CO.
"This is my 2nd fan and my old one still runs strong. The 2 speed motor comes in handy when working on different size rooms."
What is your level of technical expertise? Professional
2 of 2 people found this review helpful.
Share this Review:
