Product Reviews
Northern Industrial Rigid 6in. Pneumatic Casters
300-lb. capacity pneumatic casters with heavy duty zinc-plated steel wheel. Rubber tire inflates to 30 PSI and wheels have 1/2in. bore. 6in. x 2in. wheels come with brass valve stem and feature mounting height of 7 3/4in. Top plate dimensions are 4in. x 4 1/2in. Capacity (lbs.): 300, Wheel Size (in.): 6 x 2, Mount Height (in.): 7 3/4, Top Plate: 4 x 4 1/2, Wheel Type: Pneumatic, Material: Rubber tires, Finish Type: Zinc plated, Includes (qty.): 1
Average Customer Rating:
out of
5
6 of 7(86%)would recommend this product to a friend.
Customer Reviews for Northern Industrial Rigid 6in. Pneumatic Casters
Overall Rating:
/
5
Require a lot of attention in heavy use,
November 17, 2008
By BandDad
from Pennsylvania
"Excellent for light to medium use when low-profile pneumatic castors are required. Frames are very rugged for heavy use. However, when you get close to the weight limit (300 Lb), tires are prone to damage if not kept properly inflated. Because of size of wheel, inflation in the field can be very difficult."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 2 for Northern Industrial Rigid 6in. Pneumatic Casters
Overall Rating:
/
5
Pneumatic Casters,
August 11, 2008
By JoeButch
from Mountain View, Arkansas
"I own a radial arm saw and desided due to the weight and size of this power tool "Pneumatic Casters" would provide excellent manuverability.
I could not find what I needed in a local hardware and living in a rural area internet shopping with Northern Tools provided the resource I needed to eliminate dragging this heavy saw around my shop.
I would highly recommend the 6" pneumatic casters, rigid or swivel, for heavy shop power tools."
I could not find what I needed in a local hardware and living in a rural area internet shopping with Northern Tools provided the resource I needed to eliminate dragging this heavy saw around my shop.
I would highly recommend the 6" pneumatic casters, rigid or swivel, for heavy shop power tools."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 3 for Northern Industrial Rigid 6in. Pneumatic Casters
Overall Rating:
/
5
nice casters,
November 8, 2007
By jjproaudio
from Indiana
"I have 2 rigid and 2 swivel mounted To my pro audio amplifier rack and they work great. This rack weighs close to 250 pounds and gets rolled over all kinds of surfaces including my yard and gravel driveway. It rolls with ease. another reviewer was right about the odor, they do stink prety bad, I left mine outside on my porch for a week and most of the smell is gone. great for the money."
What is your level of technical expertise? Professional
Share this Review:
Review 4 for Northern Industrial Rigid 6in. Pneumatic Casters
Overall Rating:
/
5
Wheel,
October 29, 2007
By Romans1013
from Rock Hill, SC
"Good solid wheel. A little expensive. I bought several and a couple had holes in the tubes. The store exchanged them with no questions."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 5 for Northern Industrial Rigid 6in. Pneumatic Casters
Overall Rating:
/
5
casters,
July 12, 2007
By Zippy
"These casters will no way come near to handling the 300 lbs advertised. NTC was gracious enough to refund my full purchase price."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 6 for Northern Industrial Rigid 6in. Pneumatic Casters
Overall Rating:
/
5
casters,
July 9, 2007
By CaptMorgan
from Northern Ca.
"the casters were very well constructed. I have used them to roll a 200 lb load.
I'd recommend these for industrial use over rough surfaces."
I'd recommend these for industrial use over rough surfaces."
What is your level of technical expertise? Professional
Share this Review:
Review 7 for Northern Industrial Rigid 6in. Pneumatic Casters
Overall Rating:
/
5
Ok...,
March 7, 2007
By Danniel
from Tucson, AZ
"This wheel works fine. If you need to transport a 4-wheel cart its fantastic. I only needed 1 to make my own bass wheel (in order to wheel my double bass from home to school instead of carrying it). It works great. There's only 1 problem: the smell of tire is kind of strong. Great for a workshop or garage, not so great for home."
What is your level of technical expertise? Beginner
0 of 1 people found this review helpful.
Share this Review:
