300-lb. capacity pneumatic casters with heavy duty zinc-plated steel wheel. Rubber tire inflates to 30 PSI and wheels have 1/2in. bore. 6in. x 2in. wheels come with brass valve stem and feature mounting height of 7 3/4in. Top plate dimensions are 4in. x 4 1/2in. Includes (qty.): 1
Average Customer Rating:
4.7 out of 5
Rating Summary
(10 reviews)
5 stars
8
4 stars
1
3 stars
1
2 stars
0
1 star
0
10 of 10 (100%) customers would recommend this product to a friend.
Customer Reviews for Northern Industrial Swivel 6in. Pneumatic Caster
Overall Rating:
5
/ 5
Helloooo Dollyeeee!!!!!!!,July 13, 2009
By BillMacfrom Panama City FL
"After breaking numerous piano and moving dollys I decided to take things into my own hands and build a serious dolly. My guys have nicknamed our new dolly "Bigfoot" as we have 6 of these pneumatic casters under a 4x3 foot frame made of 2x8s. Needless to say it is heavy but it rolls across my gravel lot with ease while holding 12 foot beams and pipes for boat lifts. Due to the placement of the building and the road we cannot use a dock so we load directly from the lift gate on the truck down to "bigfoot" where it does the rest. Thanks for yet another product that helps make life a little easier."
What is your level of technical expertise?:
Professional
Share this Review:
Review 2 for Northern Industrial Swivel 6in. Pneumatic Caster
Overall Rating:
5
/ 5
Pneumatic Swivel Casters,August 19, 2008
By Islandmanfrom Whidbey Island, Washington
"The 6 inch pneumatic swivel casters were used to construct a three foot square wood dolly which I use to move large heavy items around our property. An example is moving the table saw from the shop across our gravel driveway and parking area, several hundred feet of lawn, to the back of the house where I'm building a deck. The move was easy, the wheels rolled smoothly across the gravel and lawn surfaces. The casters are well made and being galvanized will not rust in our damp weather conditions."
What is your level of technical expertise?:
Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Review 3 for Northern Industrial Swivel 6in. Pneumatic Caster
Overall Rating:
4
/ 5
Built Strong!,August 12, 2008
By KanyonATVfrom Panguitch, UT
"I purchased six of these to make a flat cart approximately 6' X 4' to move equipment between 400 and 100 pounds around my lot by towing it with an OHV (can't afford a forklift yet). I have large gravel so I went with the inflatable casters hoping it would roll over the rock, which it does perfectly. Has a little trouble where the rock is deep but in order to keep the height to a minimum this was perfect.
The only difficulty I have is the valve stems are difficult to fill because of the limited room but there isn't much choice on the design of it."
What is your level of technical expertise?:
Professional
Share this Review:
Review 4 for Northern Industrial Swivel 6in. Pneumatic Caster
Overall Rating:
3
/ 5
Good for light weight applications,August 12, 2008
By whowutwutfrom Wappingers Falls, NY
"I bought 2 of these for the front wheels of a car dolly and another 2 non swivel for the rear. The shell was completely stripped inside and out (no subframe or any suspension components) so it did not weigh too much. The pneumatic wheels had alot of trouble rolling around the smooth garage floor. I had to switch to ridged casters. Casters are too soft to handle a lot of weight. Recommended for light weight applications."
What is your level of technical expertise?:
Home Handyman
Share this Review:
Review 5 for Northern Industrial Swivel 6in. Pneumatic Caster
"Excellent product, well made and easily adaptable to most all configurations.
Very fast shipping, and good communications, and follow up after the sale."
What is your level of technical expertise?:
Professional
Share this Review:
Review 6 for Northern Industrial Swivel 6in. Pneumatic Caster
Overall Rating:
5
/ 5
Pneumatic is the way to go, these are a good buy.,May 20, 2008
By Anonymousfrom Upper Peninsula - Michigan
"I didnt know what to expect as far as quality and size but when I opened the box I became pleased and relieved. These are pretty heavy duty casters with 3/8" mounting holes (slotted) and they are heavy. The tires are of budget type and are nice with about 1/8" raised tread pattern. They have a tube in them with a sharply bent valve stem to clear the wheel supports. All are holding air. There is a grease fitting on the caster for the double row upper ball bearings. I purchased two swivel, two non-swivel, and one spare wheel/tire to replace the 2" wide 4" high wheels/casters on a rollaway box with intermediate and top box stacked on. These make the box stand taller but only a few inches which is a plus for me. They roll and turn much easier and quieter than rigid wheels. My box rolls over uneven floors and cracks/holes in concrete 100% better. Stability of the box is better too. For the price you cant go wrong. Should last a long while."
What is your level of technical expertise?:
Professional
Share this Review:
Review 7 for Northern Industrial Swivel 6in. Pneumatic Caster
Overall Rating:
5
/ 5
Excellent Quality!,April 21, 2008
By jss0707from Crittenden, KY
"I purchased these casters to replace the worn out casters on our marching band pit carts. They work great! We'll be purchasing more in the future!"
What is your level of technical expertise?:
Professional
Share this Review:
Review 8 for Northern Industrial Swivel 6in. Pneumatic Caster
Overall Rating:
5
/ 5
Nice Casters,October 15, 2007
By jjproaudiofrom Indiana
"I bought these to mount on a pro audio amplifier rack. They work great, My amp rack weighs close to 275 pounds and four of the 6 inch casters work perfect. And it rolls very easy. For the price these are a bargain and I will be buying more for my second rack. Also northern tool has very fast shipping I think it was only 2 days to my door. Exellent purchase!"
What is your level of technical expertise?:
Professional
Share this Review:
Review 9 for Northern Industrial Swivel 6in. Pneumatic Caster
Overall Rating:
5
/ 5
Great value!,October 15, 2007
By SpiderMonkeyfrom Eastern Oklahoma
"I used these to replace the junky castors that came on my BBQ grill. Didnt take long and man they work great! Now my grill goes anywhere! I looked around and these by far are the cheapest in price anywhere."
What is your level of technical expertise?:
Home Handyman
Share this Review:
Review 10 for Northern Industrial Swivel 6in. Pneumatic Caster
Overall Rating:
5
/ 5
I was pleasently surprised,October 15, 2007
By Anonymousfrom I am in Central Fl USA
"I was very pleasently surprised with the quality and strength of this AND if even had a grease fitting.
Thanks Northern you dit id again!!"
What is your level of technical expertise?:
Professional
