"The Fairbanks Swivel Weldless Caster features one-piece construction to eliminate stress build-up. Double ball raceways and seal ring keep lubrication in and dirt out. 2 5/8in. to 3in. x 3in. to 3 5/8in. bolt hole spacing. 3/4in. king pin. Top plate size 4in. x 4 1/2in. U.S.A. Mount Height in. 7 1/4, Capacity lbs. 1,200, Foot Brake No, Casters qty. 1, Finish Type Gray, Bearing Type Roller, Wheel Width in. 2, Caster Type Swivel, Wheel Type Semi-steel, Wheel Diameter in. 6, Top Plate Dimensions L x W in. 4 1/2 x 4, Material Type Steel, Bolt Hole Spacing 3-3 5/8 x 2 5/8-3, Overall Height in. 7 1/4. One-piece fork assures less failure and longer life 3/4in. king pin is orbital cold forged for superior strength and stability Nylon grease seal keeps dirt and debris out of the upper ball raceway Gray powder-coat finish prevents corrosion Rugged semi-steel wheel 1200-lb. capacity"
Average Customer Rating:
(1 Review) 1
Rating Summary(1 review)
1 of 1(100%)would recommend this product to a friend.
When I built an overhead hoist I knew that I needed three things. First :a swivel caster that would supply adequate support for a twelve foot tall hoist platform. Next it would have to be mobile in all directions. Third it would live in a heavy truck repair shop that is not always perfectly clean and smooth. These casters more than met these requirements. They are easliy moved under load over a dirty floor and guided in any direction. They don't show any loss of mobilty under load, in other words, they don't lock up under pressure. Third, they are a lot of bang for the buck. Thanks again Northern!
Describe Yourself: Professional
1out of1found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.