Customer Reviews for Wel-Bilt Sawhorse with Chain Saw Holder
Wel-Bilt Sawhorse with Chain Saw Holder
Item# 20668
This is the safe, easy way to make cuts standing up. Four legs with flat plate design give you stability. The chain saw holder easily attaches to most chain saws. Works With Logs, Capacity lbs. 220, Application Sawhorse, Diameter in. 3/4. Holds logs up to 6ft.L x 8 3/4in. dia. 2mL x 22cm dia. and up to 220 lbs. Corrosion-resistant galvanized steel construction Folds for storage 34 5/8in.L x 28in.W x 33 27/32in.H in use 34 5/8in.L x 6 1/8in.W x 3 27/32in.H folded Not related to WELBILT products of Enodis companies
Average Customer Rating:
(7 Reviews) 7
Rating Summary (7 reviews)
5 stars
2
4 stars
4
3 stars
0
2 stars
1
1 star
0
6 of 7(86%)would recommend this product to a friend.
Customer Reviews for Wel-Bilt Sawhorse with Chain Saw Holder
Review 1 for Wel-Bilt Sawhorse with Chain Saw Holder
Overall Rating:
Works
,December 24, 2012
By LimaRomeoHotel
from Winslow, AZ
"Well engineered but lacks any kind of assembly instruction. Tried a small electric chain saw with a 10" blade - No way that will work, Needs at least a "14" blade. Just ordered a 16" electric so that should solve that problem. Folds up well and is light enough to hang on a wall for storage. Really needs adjustable length legs for both height adjustment and uneven ground. Very good overall but if your'e not able to figure out where things go with only a partial diagram don't buy this product."
Describe Yourself: Home Handyman
0points
0out of 0found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 2 for Wel-Bilt Sawhorse with Chain Saw Holder
Overall Rating:
Works as Described
,October 8, 2012
By imdmntd2
from Shawnee, Ok
"I used the Sawhorse to cut 2-inch slices for a country wedding. The largest diameter I could cut with my 20" chiansaw was a14 inches. Assembly instructions were average, but this is par for the course for anything you assembly anymore."
Describe Yourself: Home Handyman
0points
1out of 2found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 3 for Wel-Bilt Sawhorse with Chain Saw Holder
Overall Rating:
Needs a smaller gap, otherwise OK
,September 16, 2012
By Gramp
from New Hampshire
"This thing works well. It begs for an electric chain saw (I bought a Worx w/ a 16" bar). The gap at the apex of the vee should be smaller. Small wood tends to fall thru."
Describe Yourself: Home Handyman
+1point
1out of 1found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 4 for Wel-Bilt Sawhorse with Chain Saw Holder
Overall Rating:
Great if you are vertically challenged...
,May 24, 2012
By ProSnowPlowGuy
from Ontario, Canada
"This product is a great idea, but in practice it is waaaaaaay too short. Might work ok if you are around 5' tall, I'm 6'-3" and there's no way I can comfortably use this. It is well below my waist, so if I'm going to bend over that much there is no point. Telescopic adjustable legs would be an easy design change, and could make it take up less space in storage. The current design is a complete FAIL in my eyes."
Describe Yourself: Professional
+3points
3out of 3found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 5 for Wel-Bilt Sawhorse with Chain Saw Holder
Overall Rating:
Wel-Bilt Sawhorse with Chain Saw Holder
,May 7, 2012
By JDLLC
from Salem VA
"OVERALL GOOD PRODUCT SAW HORSE PART IS A LITTLE WEAK BUT SAVES TIME AND MAKES ALL CUTS THE SAME AND THAT’S ALL THAT MATTERS WHEN STACKING WOOD LOL"
Describe Yourself: Professional
+1point
1out of 1found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 6 for Wel-Bilt Sawhorse with Chain Saw Holder
Overall Rating:
Saves the back and chain big time
,January 10, 2012
By Livinthegoodlife
from NE Wisconsin
"Have tried a variety of ways to deal with the smaller branches when cutting firewood. Really like the gauge feature. Also keeps the chain out of the dirt. Only improvement I made was to drill two small holes in my chain saw bar for the clamp to grip better. It had a tendency to slip and allow the chain to contact the guard. It is light (makes it easy to carry through the woods) but I use this exclusively for the branches that don't need to be split. Anything larger could be an issue."
Describe Yourself: Professional
+4points
4out of 4found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.
Review 7 for Wel-Bilt Sawhorse with Chain Saw Holder
Overall Rating:
Should have bought two
,October 10, 2011
By Anonymous
from Western NC
"I cut firewood every year. I had thought about making something like this but never got around to it, then found this item. I could not have built this for the price, let alone the tinkering time to engineer it plus fabricate it. It fills my need quite well although it could have used heavier materials (steel tubing) for the legs etc. Wish my chainsaw had wider bar for clamping in the saw holder , but otherwise everything functions GREAT. Shouda bought two."
Describe Yourself: Home Handyman
+6points
6out of 6found this review helpful.
Share this Review:
Thank you! You have successfully submitted a comment for this review.