Northern Tool Ratings and Reviews
Shop Now At Northern Tool

Customer Reviews for "Husqvarna Chain Saw - 16in. Bar, 40.9cc, 0.325in. Chain Pitch, Model# 435-16"

"Husqvarna Chain Saw - 16in. Bar, 40.9cc, 0.325in. Chain Pitch, Model# 435-16"

Item# 31780
"This lightweight, efficient all-around Husqvarna Chain Saw is ideal for those that are looking for a chain saw that is exceptionally easy to start and maneuver. Features a 2.49 cubic inch, 40.9cc, 2.2 HP X-Torq engine with Smart Start, lower fuel consumption and reduced emissions levels, plus a fuel pump and an auto-return stop switch for easier starts. Chain Pitch in. 0.325, Oil Pump Flow Automatic, Chain Saw Type Gas, Engine Speed RPM 9,000 max., 2,900 idle, GasOil Fuel Mix Ratio 501, Primer Bulb Yes, Chain Brake Yes, Engine Displacement cc 40.9, Noise Level dB 102, Bar Length in. 16, Oil Capacity oz. 0.53, Low Vibration Handle Yes, Chain Gauge in. 0.050, HP 2.15, Case Included No, Fuel Capacity oz. 12.51, Tool-Less Chain Tensioning No, Tool Weight lbs. 9.2. 40.9cc, 2.2 HP X-Torq engine with Smart Start delivers power with lower fuel consumption and reduced emissions levels LowVib system lessens operator fatigue by reducing vibration levels Centrifugal air cleaning system removes large pieces of dust and debris before they reach the air filter for reduced air filter cleanings and improved engine life Quick-release air filter for easy cleaning and replacement Ergonomic handle with soft inlay, ergonomic trigger and asymmetric handle Distinct felling marks for better felling precision Combined choke/stop control for easier starting and reduced risk of engine flood Side-mounted chain tensioner for easy access Forced three-piece crankshaft for durability in the toughest applications Transparent fuel indicator makes it easy to check fuel level Inertia-activated chain brake reduces the likelihood of injury due to kickback Snap-lock cylinder cover saves time when changing spark plugs"
Average Customer Rating:
4 out of 5
4
 out of 
5
(4 Reviews) 4
Open Ratings Snapshot
Rating Summary (4 reviews)
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 star
1
3 of 4(75%)would recommend this product to a friend.
Customer Reviews for "Husqvarna Chain Saw - 16in. Bar, 40.9cc, 0.325in. Chain Pitch, Model# 435-16"
Review 1 for "Husqvarna Chain Saw - 16in. Bar, 40.9cc, 0.325in. Chain Pitch, Model# 435-16"
Overall Rating:
5 / 5
5 / 5

Excellent Buy

,
May 18, 2015
By Robexar
from Round Rock, Tx
" Put my chain saw to immediate use and worked as designed. Could not be happier with the purchase. Top of the line performance! "
Describe Yourself: Home Handyman
0points
0out of 0found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 2 for "Husqvarna Chain Saw - 16in. Bar, 40.9cc, 0.325in. Chain Pitch, Model# 435-16"
Overall Rating:
5 / 5
5 / 5

So far So Good

,
March 10, 2015
By NASGroup
from Raleigh, NC
" I have had limited use of this saw, but have owned multiple larger and smaller saws over the years.
I bought the 435 for doing some property cleaning. On the first use, I had a few 8" to 12" elm and pine trees that needed to come down, plus a whole bunch of small stuff. The saw made short work of this job. With the bigger stuff just keep the rpm up and the chain will bury, but does not bog down.
The next use was after a major ice/snow storm. Major for Raleigh, NC standards :-), that is, and I had a number of limbs down or cracked and a few small trees hanging over. This saw is great for limbing, etc due to is light weigh.
I had read that the saw is hard to start. Cold or Hot, if you follow the instructions, it will start with 1 or 2 pulls.
It is a great little saw for a great little price. "
Describe Yourself: Home Handyman
+2points
2out of 2found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 3 for "Husqvarna Chain Saw - 16in. Bar, 40.9cc, 0.325in. Chain Pitch, Model# 435-16"
Overall Rating:
1 / 5
1 / 5

Never would start - out of the box

,
December 15, 2014
By AquaPoolTile
from Orange Co, California
" I looked at all the great reviews on this site and thought I was buying a quality saw. Got it home and the thing refused to start. DAYS AND DAYS of pulling on the cord. New fuel, new oil, no go. Northern said to call the Mfg. Mfg said to take it in. Now in the shop being worked on. REALLY NOT WHAT I HAD IN MIND. "
Describe Yourself: Professional
0points
3out of 6found this review helpful.
Thank you! You have successfully submitted a comment for this review.
Review 4 for "Husqvarna Chain Saw - 16in. Bar, 40.9cc, 0.325in. Chain Pitch, Model# 435-16"
Overall Rating:
5 / 5
5 / 5

BUY BUY BUY

,
January 18, 2014
By FEfan
from Asheville, NC
" Bought this chainsaw Friday night and dropped and sectioned 5 trees saturday AM. Smallest tree was 52" at the base and this saw was a dream to use. The provided chain was great and lasted 3 trees untill it started to dull. I bought a replacement chain with the saw and just swapped it out instead of stopping to resharpen. Have since sharpened and ready for the replacement to dull. Just read and follow the instructions and make sure to use non-ethonol gas and it should last a long time. It looks to be built well and is super easy to start cold or warm. "
Describe Yourself: Home Handyman
+4points
17out of 30found this review helpful.
Thank you! You have successfully submitted a comment for this review.