"The SHOP FOX Deluxe Milling Machine is fortified with a quick-tilt headstock for horizontal milling, 1 HP brushless motor, a multi-function digital depth scale on the quill, push-button speed control and digital spindle tachometer. The quick reversing tapping feature also makes hole threading simple. Just put the machine in 'tapping mode,' start the tap, and when the thread is completed, push the button at the end of the rack levers and the spindle reverses, immediately withdrawing the tap from the hole. The back-lit digital tachometer tells you the precise spindle speed for matching tooling and material. Cannot ship to AK, CA, CT, HI, LA, MA, MD, MS and RI Worktable L x W in. 6 1/4 x 21 5/8, Stand Included No, Drilling Capacity in. 1, Speed RPM 3,500, Draw Bar 7/16 in. x 20 TPI, HP 1, Swing 18in., Max. Spindle Distance in. 14 3/4, Dimensions L x W x H in. 27 x 30 x 33 3/4, Chuck Size in. R-8, Light Included No, Volts 220. Over 14in. of headstock movement Dovetail column Digital spindle scale reads metric or inches, zero set, on/off Head tilts 90 Push-button variable speed Back-lit digital speed display Reversing buttons on the rack handles for tapping Coolant trough Front-mounted fine feed knob Push-button motor control for forward, reverse, tapping and off Front-mounted E-stop button See-through chip guard with safety switch Brushless DC motor w/ step-up transformer, 110V operation Spindle taper R-8 Spindle travel 2 7/8in. Swing 18in. Max. distance spindle to table 14 3/4in. X and Y handwheel calibration 0.001in. Z handwheel calibration 0.005in. T-Slots 3 @ 1 11/16in. centers, 3/8in. studs Table size 6 1/4in. x 21 5/8in. Table travel longitudinal 15 7/8in. Table travel cross 5 3/4in. Headstock travel 14 7/8in. Drilling capacity 1in. Max. face cutter diameter 2in. Quill diameter 60mm Variable speed 100 - 1750 RPM"