"Campbell Hausfeld designed this system to provide a fine finish on wood and metal surfaces such as cabinets, trim, woodworking and metal projects. The high-performance 2-stage turbine motor provides more power and longer life for applying lacquers, stains, enamels and other solvent-based materials with flash points higher than 99F. It can also spray latex and water-based coatings, though some thinning may be required. Paints and solvents that contain hydrogenated hydrocarbons should not be used with this system. U.S.A. Flow GPM 0.07, Hose Length ft. 25 50-ft. max., Max. PSI 5, Paint Capacity gal. 1 quart, Volts 120. Turbine-assist HVLP paint sprayer no compressor needed High-performance 2-stage turbine motor 54 CFM Durable construction delivers consistent coverage Metal pattern adjustment can create round, vertical and horizontal spray patterns Metal air flow can adjust spray pattern from 1/4in. to 6in. Metal material flow to obtain proper adjustment for light through heavy materials Maximizes coverage with little or no over spray No assembly required"