Top Rated Product
Product Reviews
Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Briggs & Stratton 205cc 900 Series™ Industrial/Commercial Horizontal Engine produces 9.00 ft.-lbs. Gross Torque to get the job done. Compact overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. High flow cylinder head produces 20% more power than conventional engines, increased fuel efficiency and significantly reduced emissions. This engine has fast fuel delivery for one-pull starts and smooth operation. Not for sale in California (CA residents please see CA CARB-Approved engine NTE Item# 60682). Customers are responsible for checking local codes and regulations prior to purchase. Displacement (cc): 205, Shaft Dimensions Diameter x L (in.): 3/4 x 2 27/64, Application: Tillers, log splitters, compressors and pressure washers, Torque (ft./lbs.): 9.00, Shaft Output: Horizontal, Engine Type: OHV, Start Type: Recoil, Mounting Base L x W (in.): 6.38 x 3.13, Bolt Circle (in.): 3 5/8, PTO Height (in.): 4.17, Shaft Keyway (in.): 3/16, Shaft End Tapped (in.): 5/16-24, Max. RPM: 3,600, Ignition System: Magnetron® Electronic, Cylinders (qty.): 1, Fuel Tank Capacity (qt.): 3, Oil Capacity (qt.): 18-20 oz., Air Cleaner Type: Dual element includes automotive-type pleated paper air filter and foam pre-cleaner, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.69 x 2.20, Cylinder Bore: Cast iron, Cooling System: Air Cooled, Carburetor: Float, Governor System: Mechanical, Auto Compression Release: Yes, Dimensions L x W x H (in.): 12.4 x 16 x 17, EPA/CARB Approval (California Air Resource Board): No Displacement: 12.57 cu. in. PTO ball bearing Rocker stop switch Self-lubricating heavy-duty bearing is made of steel-backed Teflon-coated bronze to withstand load and reduce wear Dura-Bore™ cast iron sleeve withstands wear and abuse while providing improved oil control Fuel shutoff valve makes it easy to shut off fuel flow for safe transportation Mechanical governor controls the throttle to deliver more power for tough chores
Average Customer Rating:
out of
5
15 of 15(100%)would recommend this product to a friend.
Customer Reviews for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
Engine Replacement for Rototiller,
March 23, 2009
By acreech
from Idaho
Reviewer Images
(click to see full-size image)
"I purchased this Briggs and Stratton Motor to replace a Tecumseh Motor that was on my Troybilt Tiller. This motor bolted on with know problems. It was simple to remove the old motor and bolt on the new one. I have used it for 1 year now and it still starts on the 1st or 2nd pull. It has enough power to till at the maximum depth that you can on a "Horse" model Troybilt tiller.
I would recommend this product to anyone replacing an engine on a Troybilt Tiller."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 2 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
Briggs,
March 16, 2009
By bobtaildriver
from Tripoli. WI
"Having purchased this briggs engine, I can't believe how easy it is to start. Having many pieces of equipment with gas engines the horsepower delivered by this one is fantastic. There were times that I felt that it delivered more than what it is rated for. If I have another pieces of equipment that I lose an engine on I would definitely replace it with a briggs engine, as long as the piece of equipment is worth it."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 3 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
Rototiller Engine Replacement,
November 18, 2008
By StuartD
from Swanton, Ohio
"I purchased this engine to replace the old one on my rototiller. The engine is great. I was able to install the engine in about 45 minutues and it started on the second pull. I am very please with this purchase."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 4 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
Briggs Engine,
August 11, 2008
By jonesms
from Chillicothe, Ohio
"The engine met all my expectations and performs great. The only thing that makes my rating 4 stars intead of five is that the engine was supposed to be shipped full of oil and it was only about half full and there was not any oil shipped with it to add."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 5 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
Old Log splitter - new life!,
April 22, 2008
By RCB91485
from Upstate NY
"After having my old B&S 5HP engine die out and overhauled the previous year (at about 3/4 the price of this one) it still didn't run reliably.
I found this 6.5HP engine bolted right up in less than 30min and wow!! my old splitter had new life!! Well it's been about 2 yrs with the new engine and it still starts EVERYTIME.!!
My only complaint would be the cheap plastic fuel tanks that are not impervious to mice or squirrles, but hey....it was a fair price compared to Honda's w/ a metal tank."
I found this 6.5HP engine bolted right up in less than 30min and wow!! my old splitter had new life!! Well it's been about 2 yrs with the new engine and it still starts EVERYTIME.!!
My only complaint would be the cheap plastic fuel tanks that are not impervious to mice or squirrles, but hey....it was a fair price compared to Honda's w/ a metal tank."
What is your level of technical expertise? Professional
Share this Review:
Review 6 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
Happiness is Briggs & Stratton,
April 21, 2008
By Mag00
from Las Vegas, Nv
"I purchased this 6.5 HP Briggs & Stratton engine as a replacement for an older 5.0 HP engine supplied by another manufacturer. The original engine had less than 50 hours run time when a broken camshaft sent it to the junk yard. I recieved the new B&S engine from Northern in less than a week.
Installation on my chipper took about 1.5 hours. Once mounted, I filled the crankcase and gas tank and pulled once on the starter rope. I was totally amazed, it started on that first pull. The ignition and induction systems on this OHV engine are the best I've seen in my 40 years of dealing with small engines of this type. After sitting throughout the winter, the spring start up still took only one pull. You couldn't buy this engine from me for 5 times the purchase price."
Installation on my chipper took about 1.5 hours. Once mounted, I filled the crankcase and gas tank and pulled once on the starter rope. I was totally amazed, it started on that first pull. The ignition and induction systems on this OHV engine are the best I've seen in my 40 years of dealing with small engines of this type. After sitting throughout the winter, the spring start up still took only one pull. You couldn't buy this engine from me for 5 times the purchase price."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 7 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
Nice Engine,
October 15, 2007
By walt9
from 9 miles from La Pine, OR
"The Briggs 6.5 hp replaced my very old 5hp engine. The motor mounted on my 25 ton log splitter just like putting on a pair of slippers. The total time involved was less than 30 minutes. The engine started in 3 pulls, but since then, it usually start in 1 to 2 attempts. The altiude of 4500 feet where I live has had no effect on starting, which greatly pleased me. the only complaint I have is checking the oil level. My old Briggs had anoil dip stick, and the new motor you must remove a plug to check."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 8 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
Excellent replacement engine,
October 8, 2007
By Californian
from Eureka, California
"Purchased as a replacement engine for my wood splitter. It was 1/2 the price of a local one. Bolted right up and started on the first pull. I split 30 cords of wood with it this summer. Excellent price and value."
What is your level of technical expertise? Home Handyman
Share this Review:
Review 9 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
Restoration of Lawnmower,
October 8, 2007
By tallgrassmowerman
from southwest florida
"During the process of trying to find a suitable replacement motor for an old hi-wheeled mower I wanted to restore, I looked in the Northern online catalog to check what was available. The 6.5 B&S Intek popped up on the sale page. After checking the specs I decided to try it out. It's been over 2 months since I've installed this engine and I can tell you that it really is a workhorse! I have had some different situations with Northern before and every time I have needed any help they have customer service that is second to none. I plan on ordering another small engine soon after checking the latest online update, I found a motor that I was interested in and it's also on sale!"
What is your level of technical expertise? Professional
Share this Review:
Review 10 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
honda engine,
July 9, 2007
By drclean
from virginia
"it fit my log splitter perfectly, has a lot of power and is very easy on gas. I have other splitters that use twice as much gas. this engine will run apx. 3.5 hours on one fill up. Will replace all the engines on my splitters with this engine when the one on it goes bad."
What is your level of technical expertise? Professional
Share this Review:
Review 11 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
Briggs & Straton 6.5 hp,
July 9, 2007
By tcbellusa
from Baton Rouge, LA
"I received shipment fast. Packaged great. Engine started on second try. Now have used the engine for a week with no problems. Great product. Thanks!"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 12 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
BRIGGS 6.5 ENGINE,
July 9, 2007
By BART043
from VIRGINIA
"ENGINE LOOKS GOOD .CLEAN LINE STARTS ON FIRST PULL.
ENGINE HAS GOOD TORO ANDPOWER. ENGINE RUNS QUITE"
ENGINE HAS GOOD TORO ANDPOWER. ENGINE RUNS QUITE"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 13 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
Amazing Engine for the Price,
March 9, 2007
By rbmd
from Maryland
"I used this engine as replacement for a Troy Bilt Horse model tiller. It arrived in perfect condition, after I removed the OEM engine and bolted up the Briggs, I put syntethic oil in it and filled the gas tank. Amazingly it started on the first pull (no kidding it really did happen that way). This engine is quiter, has more power and uses less fuel than the OEM 6 hp that was on the tiller. Don't rebuild you OEM tiller engine, repower with this one!!!!"
What is your level of technical expertise? Home Handyman
Share this Review:
Review 14 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
B & S 6.5 Intek,
March 7, 2007
By booboo
from Pawcatuck, Ct. (southeastern Ct )
"The engine preforms very nicely for my log splitter . The quietness, ease of starting, bolt pattern alignment, and smoothnes of operation under a pretty good load was a little more than expected. The price and delivery time were better than expected as well. This 6.5 Hp has some punch without bogging down at all under a reasonable amount of resistance."
What is your level of technical expertise? Professional
Share this Review:
Review 15 for Briggs & Stratton I/C OHV Horizontal Engine — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122032-0536-B8
Overall Rating:
/
5
best engine,
December 4, 2006
By vk112791
from el cajon, ca
"this is one of the best engines for a go kart very relieble and northern tool got it sent to me right on time."
What is your level of technical expertise? Home Handyman
Share this Review:
