Top Rated Product

Briggs & Stratton I/C OHV Horizontal Engine with Electric Start — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122037-0550-B8

Product Reviews

64in. Shaft, Model# 122037-0550-B8

Briggs & Stratton 205cc 900 Series™ Industrial/Commercial Horizontal Engine produces 9.00 ft.-lbs. Gross Torque to get the job done. Features 12V electric start with recoil backup. Compact overhead valve design runs cooler and cleaner delivering more power, longer engine life and improved fuel economy. High flow cylinder head produces 20% more power than conventional engines, increased fuel efficiency and significantly reduced emissions. This engine has fast fuel delivery for One-Pull starts and smooth operation. Not for sale in California. Customers are responsible for checking local codes and regulations prior to purchase. Displacement (cc): 205, HP: 6.5, Application: Tillers, log splitters, compressors and pressure washers, Torque (ft./lbs.): 9.00, Shaft Output: Horizontal, Engine Type: OHV, Start Type: Electric with recoil backup, Shaft Dimensions L x W (in.): 3/4 x 2 27/64, Mounting Base L x W (in.): 6.38 x 3.13, Bolt Circle (in.): 3 5/8, PTO Height (in.): 4.17, Shaft Keyway (in.): 1/4, Shaft End Tapped (in.): 5/16-24, Max. RPM: 3,750, Charging System Amps: 1.5, Ignition System: Magnetron® Electronic, Cylinders (qty.): 1, Fuel Tank Capacity (qt.): 3, Oil Capacity (qt.): 18-20 oz., Air Cleaner Type: Dual element includes automotive-type pleated paper air filter and foam pre-cleaner, Muffler Included: Yes, Low Oil Alert: No, Lubrication System: Splash type, Shaft Rotation (From PTO Shaft Side): CCW, Bore x Stroke (in.): 2.69 x 2.20, Cylinder Bore: Cast iron, Cooling System: Air Cooled, Carburetor: Float, Governor System: Mechanical, Auto Compression Release: Yes, Dimensions L x W x H (in.): 12.4 x 16 x 17, EPA/CARB Approval (California Air Resource Board): No Displacement: 12.57 cu. in. PTO ball bearing Flow-Tek flywheel design Permanent mold piston Removable rewind Comfort-Tek pull handle Self-lubricating heavy-duty bearing made of steel-backed Teflon coated bronze to withstand load and reduce wear Dura-Bore™ cast iron sleeve withstands wear and abuse while providing improved oil control Fuel shut-off valve makes it easy to shut off fuel flow for safe transportation Mechanical governor controls the throttle to deliver more power for tough chores

Average Customer Rating:

5 out of 5

1 of 1 (100%) customers would recommend this product to a friend.

Customer Reviews for Briggs & Stratton I/C OHV Horizontal Engine with Electric Start — 205cc, 900 Series, 9.00 Gross Torque, 3/4in. x 2 27/64in. Shaft, Model# 122037-0550-B8

Overall Rating:

5 / 5

Briggs & Stratton engines, October 19, 2009
By Deedle from Independence, Ks

"Not really a whole lot that can be said, anyone who knows anything about small engines already knows that Briggs & Stratton have been around for years. Their quality has gotten even better over the years with all the new technologies in metal. They are a true first pull engine!, some of the others you will find boast that but do not provide. I had a brand H on a air compressor, it came that way from the factory. Could not wait for it to blow up and like most brand H power units it did in about two years. Put an Intek Briggs and Stratton on it about five years ago. The engine is still after all that time a first pull engine, no matter the weather or how long it sets. I have the same 8 hp Intek on my miniture Peterbilt that I built for my Shriner parade vehicle, it is about five years old now and is still a first pull engine. I don't think there is a better quality small power unit that has ever been built. After 42 years on earth I have seen Briggs and Stratton perform when left outside in the weather when the others wouldn't even when they were garage kept. That is quality to me, with a value all its own."

What is your level of technical expertise?: Professional

Share this Review: