Shop Now At Northern Tool
Top-Rated Products
1,000 - 1,499 Lbs. Reviews
Overall Rating:
"I put a set of these caster on a boat skid / stand. The boat weighed in at @ 6000 pounds. These casters worked perfectly. I moved the boat several times in my shop with no problem."... (read full reviews)
Overall Rating:
"I needed a couple of good, strong wheels to keep the back of my equipment trailer from bottoming out. These have the strength and capacity that I needed. They have a grease fitting to keep 'em"... (read full reviews)
Overall Rating:
"Used to build heavy duty diesel engine stands.
Held tp to weight well and is easy to manuever.
Very satisfied."... (read full reviews)
Overall Rating:
"I used them on a chain lift gantry. They move very smoothly and pivot easily with a load on them."... (read full reviews)
Overall Rating:
"I've used a set of these casters for 20 years now, set up on an inverted angle iron track. They allow me to move a half ton gantry by myself. I love them."... (read full reviews)
Overall Rating:
"Used to build heavy duty diesel engine stands.
Held tp to weight well and is easy to manuever.
Very satisfied."... (read full reviews)
Overall Rating:
"Tried locally to find some castors for me to build a platform to remove and install clutches in my tractors.
I was suspicious with the product beings I was a First time buyer. But when I open the box"... (read full reviews)
Overall Rating:
"I purchased these casters to complete the construction of a 2-Ton Gantry, which was built with 31/2 inch square steel tubing with a 3/8th inch wall thickness. It stands 14 feet high and 7 feet wide"... (read full reviews)
Overall Rating:
"When I built an overhead hoist I knew that I needed three things. First :a swivel caster that would supply adequate support for a twelve foot tall hoist platform. Next it would have to be mobile in"... (read full reviews)
Overall Rating:
"Purchased this caster to replace pneumatic casters that could sustain the loads and would always lose pressure. This caster not only sustains the load, but rolls/swivels with ease under a load."... (read full reviews)
Overall Rating:
"The anti-scalp wheels on my Kubota mower deck are very expensive and wear out or break frequently. I searched the web for quite sometime before finding this wheel. I can't use it as is due to the 3/4"... (read full reviews)
Overall Rating:
"I bought two of these and had them welded to my travel traler for drag wheels.
They definetly handle their rated load."... (read full reviews)
Overall Rating:
"I bought these casters to use on my rotissierie for cars. With a unibody car on the rotissierie they still rotate and roll very easily. Serious overkill on my part ordering a caster with a 1,000 pound"... (read full reviews)
Overall Rating:
"These casters are cheeper that most, you might suspect their quality to be like "as seen on TV". They roll incredibly easy for the load we place on them. And we load them to their maximm rating ! So"... (read full reviews)
Overall Rating:
"I used 4 of these wheels under a 4'x8' metal welding table. They handle the weight without any troubles and roll smoothly. The swivel lock works fine but the wheel lock does slip a bit. On a"... (read full reviews)
Overall Rating:
"Grease fitting on both wheels were improperly installed. How could i tell? the grease fitting came off in the grease gun. Both wheels that i had ordered the grease fitting was cocked. i managed to"... (read full reviews)